intake install/right or wrong?
11-30-09, 06:25 AM
#1
Rookie
Thread Starter
Join Date: Sep 2009
Location: nj
Posts: 74
Likes: 0
Received 0 Likes
on
0 Posts
intake install/right or wrong?
here is a picture of my intake installed.& another install of the same intake. they are installed a little different. mine is the one on top,could i please get some feed back on what is right what is wrong or are both ways ok?
11-30-09, 07:08 AM
#2
Super Moderator
Are you asking because something is wrong or not running right?
The only things here are screwing in the clamps tight and making sure the hose is on (with a clamp on the hose which is on a metal nipple hanging out of the tube). Finally, the MAF needs to be screwed in.
I don't see anything above that makes me think otherwise.
I actually like your way better where the tube joins the rest of the intake assembly because it has a flat gasket as opposed to the accordion-style gasket you see in the second picture. It doesn't matter at all where the hose/nipple is aligned.
The only things here are screwing in the clamps tight and making sure the hose is on (with a clamp on the hose which is on a metal nipple hanging out of the tube). Finally, the MAF needs to be screwed in.
I don't see anything above that makes me think otherwise.
I actually like your way better where the tube joins the rest of the intake assembly because it has a flat gasket as opposed to the accordion-style gasket you see in the second picture. It doesn't matter at all where the hose/nipple is aligned.
11-30-09, 03:21 PM
#5
Rookie
Thread Starter
Join Date: Sep 2009
Location: nj
Posts: 74
Likes: 0
Received 0 Likes
on
0 Posts
....
or are we talking just the usual $100
??????na man where are you at i would love to take her up against a 5 speed. i am waiting for my headers & y pipe to get off of back order & i am all in. would love to see a 5spd. i only dream i could have a 300 5spd
and thanks for your replies guys...i just wanted to make sure i didn't screw up putting it on is all.
11-30-09, 04:55 PM
#6
are we talking pink slips???? or are we talking just the usual $100??????
na man where are you at i would love to take her up against a 5 speed. i am waiting for my headers & y pipe to get off of back order & i am all in. would love to see a 5spd. i only dream i could have a 300 5spd
and thanks for your replies guys...i just wanted to make sure i didn't screw up putting it on is all.
or are we talking just the usual $100??????na man where are you at i would love to take her up against a 5 speed. i am waiting for my headers & y pipe to get off of back order & i am all in. would love to see a 5spd. i only dream i could have a 300 5spd
and thanks for your replies guys...i just wanted to make sure i didn't screw up putting it on is all.
He took a Camry and a 2ES and swapped motor, tranny, wiring, etc over in 10 hours of working time over two days. It runs as it was supposed to run [the 2ES].
I am sure the 3ES is no different, just have to source a 5sp trans equipped camry or JDM motor,etc while you are at it to do so.
It wouldn't be easy but as is with everything else, it is doable.
Trending Topics
12-01-09, 11:51 AM
#9
Rookie
Join Date: May 2009
Location: Michigan
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
pretty sweet system you got there, I've been looking all over for an intake system for my car, 96 es300. I can't find anything. I was thinking about getting a MAF adapter but i'm having a hard time locating those.
Thread
Thread Starter
Forum
Replies
Last Post
