Tuner571

Hey guys, I know that this question has been covered many times before, but there seems to be one small controversy between everything that I have looked at. Some people say that the swap is a direct bolt on and nothing extra is required. On the other end I found that the wiring harness is different and that some modification of the wiring harness is required in order to make this work.

If someone could help clear this up I would really appreciate it.

Cory

dcapo

shouldnt be a difference for tl excpet the amber between all years from 97-01 , should be direct fit, some body parts changed from 97-99 to 00-01 so u should be good

angmedic91

iTrader: (5)

I have a 98 ES300 and have personally done the swap over to the 00-01 taillights. It's a direct swap/bolt on, harness' are the same. Just disconnect the harness from the main loom for each tail light and connect to the 00-01 harness. The only difference is the bulbs. The bulbs are different on the 00-01 tail lights. So if your going to get bulbs from a parts store and they ask you what year is your car, you gotta remember the tail lights are from an 00-01, otherwise if you say 97-99, your going to have the wrong bulbs. Good luck with the upgrade, they are a lot nicer.

Tuner571

Thanks for the help guys, I am definitely on the look out for these tails!

Cory

lexsterES

I have a full set of 01's sitting in my garage. Pm me an offer I believe all I needed was a harness that was like 20 bucks at the dealer. I can't remember if I still have it or what it's been a long time.... I also have other stuff that I've been meaning to put in the marketplace.

01LEXPL

iTrader: (10)

^^ watcha got?

lexsterES

Don't mean to high jack this thread. The evolution eyelids you see on my sig. brembo front rotors with 300 miles, front strut bar, sc430 rims, Edit: D2 coilovers all but the front driver side missing, i think that's it.