97 es300 strut bar.
#1
Rookie
Thread Starter
Join Date: Feb 2011
Location: Caldwell, Idaho
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
97 es300 strut bar.
im looking to put a strut bar on my 97 es300. i heard that the ones from the toyota solara should fit it. does anyone know the year that i have to look for so that the strut bar fits my 97 es300 with no clearence problems?
#2
Lead Lap
iTrader: (3)
Join Date: Sep 2010
Location: LA
Posts: 456
Likes: 0
Received 0 Likes
on
0 Posts
here is one i have for sale, and another member posted there that it does fit the ES.
https://www.clublexus.com/forums/es3...wer-brace.html
https://www.clublexus.com/forums/es3...wer-brace.html
#3
Rookie
Thread Starter
Join Date: Feb 2011
Location: Caldwell, Idaho
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
do u guys know if a strut bar from an 01 solara will fit?? i can get one for 20 bucks from my local junkyard but i want to make sure it will fit with no clearence problems
Trending Topics
#11
Lexus Test Driver
iTrader: (5)
I took my little C-spacers off, then placed the strut bar on, then put back the C-spacers, thightened down all the bolts, then finished. The strut bar you purchased should work, you may have bend the bar a little to get the holes to match up. I had to bend my bar a little, so it would match up and to allow the hood to close easily. The bar does snuggly hit the insulation under the hood, but no big problem. Just make sure you are not hitting the intake manifold or EGR valves. Otherwise the engine my vibrate onto the strut bar and cause annoying vibration sounds. Good luck.
#15
Rookie
Thread Starter
Join Date: Feb 2011
Location: Caldwell, Idaho
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
well i tried bending it, twisting it, tried everything but no good. seems as if the bar is a bit short and doest line up. im starting to think that the bar might be the problem. gona return it anyways