DIY- 4ES- Grom USB Adapter + Bluetooth Dongle Installation– Picture Intensive
#31
I may have just missed it among all the photos, but did you list what the size of the bolt heads are? I just want to make sure I have the right head size as I'm away at college and I get my GROM unit tomorrow
#32
Lexus Test Driver
Thread Starter
Let me know if you have any more questions, I'm glad to help.
#33
Lexus Test Driver
Thread Starter
The installation on an RX300 is even easier than this: http://www.gromaudio.com/installs/le...be_video_.html
But, keep in mind on an RX300 it will disable the external CD changer. That's pretty much the only reason why I haven't bought one myself for the RX.
But, keep in mind on an RX300 it will disable the external CD changer. That's pretty much the only reason why I haven't bought one myself for the RX.
#34
Quite alright, 10mm seems to be standard bolts for lexus. Just waiting til later today when hopefully my GROM unit will be coming in.
#35
The installation on an RX300 is even easier than this: http://www.gromaudio.com/installs/le...be_video_.html
But, keep in mind on an RX300 it will disable the external CD changer. That's pretty much the only reason why I haven't bought one myself for the RX.
But, keep in mind on an RX300 it will disable the external CD changer. That's pretty much the only reason why I haven't bought one myself for the RX.
#36
Hypervish, this may just be me being overly cautious, but I couldn't for the life of me get the climate control unit out. I wound up removing the molding around the gear shifter and looking underneath to see what my problem was but I still was unable to remove it. Any suggestions? I mean I got the clips to the point where they were nearly clear of what was holding them, but then it wouldn't go any further. I feel like I'm just being overly cautious, but figured I'd check in here first.
#37
Lexus Test Driver
Thread Starter
Hypervish, this may just be me being overly cautious, but I couldn't for the life of me get the climate control unit out. I wound up removing the molding around the gear shifter and looking underneath to see what my problem was but I still was unable to remove it. Any suggestions? I mean I got the clips to the point where they were nearly clear of what was holding them, but then it wouldn't go any further. I feel like I'm just being overly cautious, but figured I'd check in here first.
Always good to be cautious, don't want to break anything.
#38
Once again, thanks for this well written DIY.
#39
Lexus Test Driver
Thread Starter
Thanks, one last question before I go back out and give it a try. Did you unplug the climate control? Theres no real mention of it, but I was just curious. I think I'm just cautious as this is my first major purchase over 15k. My old corolla was a beater and the electrical components weren't nearly as nice so I didn't mind using them to learn
Once again, thanks for this well written DIY.
Once again, thanks for this well written DIY.
I left the climate control plugged in, there is a lot of sag in the cable to do that safely. If your more comfortable unplugging it then you can do that. I also left the clock and hazard cables plugged in as well, there was enough slack there as well.
#40
Thanks, I just was curious if there would be some reset or something if I unplugged them, not that it would really matter. I managed to get it all successfully done and you were right, the audio is amazing.
#41
Lexus Test Driver
Thread Starter
#44
Lexus Test Driver
Thread Starter
#45