1992 ES300 Acceleration Issues
#32
Driver School Candidate
Thread Starter
Join Date: Jan 2013
Location: WA
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
My apologies, I didn't make myself clear. I took it in to do a fuel filter check and if it was the cause, which it was, then replace it. I actually searched the forums for how to do it myself, but it seemed to be easy, but time consuming, and I didn't have much time this weekend so, had them do it.
I don' t know how to check the CAT for flow/blockage, but I am bringing it to the same store when I get more cash. I suppose I could search the forums again, I'm sure I'm not the only one who has had these issues. If I had to guess, I would say we need to connect some device to the O2 Sensor or something.
I don' t know how to check the CAT for flow/blockage, but I am bringing it to the same store when I get more cash. I suppose I could search the forums again, I'm sure I'm not the only one who has had these issues. If I had to guess, I would say we need to connect some device to the O2 Sensor or something.
#35
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
My apologies, I didn't make myself clear. I took it in to do a fuel filter check and if it was the cause, which it was, then replace it. I actually searched the forums for how to do it myself, but it seemed to be easy, but time consuming, and I didn't have much time this weekend so, had them do it.
I don' t know how to check the CAT for flow/blockage, but I am bringing it to the same store when I get more cash. I suppose I could search the forums again, I'm sure I'm not the only one who has had these issues. If I had to guess, I would say we need to connect some device to the O2 Sensor or something.
I don' t know how to check the CAT for flow/blockage, but I am bringing it to the same store when I get more cash. I suppose I could search the forums again, I'm sure I'm not the only one who has had these issues. If I had to guess, I would say we need to connect some device to the O2 Sensor or something.
#36
Driver School Candidate
Thread Starter
Join Date: Jan 2013
Location: WA
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
I'll have the cat checked out next week. If it proves to be clogged, I might save up more cash so I can get both the new cat and a custom Y pipe. I've been informed that a wider Y pipe adds quite a bit of HP.
I was thinking of doing the porting while my heads were off, but I was quoted $800 and I simply didn't have the cash at the time. Could have done it myself, but I don't have a garage to keep this car in so....ohhh well.
I was thinking of doing the porting while my heads were off, but I was quoted $800 and I simply didn't have the cash at the time. Could have done it myself, but I don't have a garage to keep this car in so....ohhh well.
#37
Driver School Candidate
Join Date: Aug 2014
Location: Wi
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
i have a 1992 lexus es 300 with the 3vzfe 5 speed trans and im did the vc gaskets intake gasket cleaned the intake and changed plugs and wires now im changing the clutch.... its seems like i would have to drop the down pipes? im not sure i have everything reaady to pull the trans but the bottom three bolts i think need to be removed but i cant with the pipes in the way.. anyways anybody have any experiance with doing a clutch in one of these it is my first time any pointers would be awsome thanks!
#38
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
never had a standard, but the "Y" pipe is pretty easy to remove. I seem to recall a couple of springs to pull off near manifolds, and maybe a clamp or 2 down below, then it's loose/disconnected, some wiggling and twisting and it's off and out of the way.
#39
Driver School Candidate
Join Date: Aug 2014
Location: Wi
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Igot everything out and it's all ready for a new clutch but I can't find a new flywheel anywhere no parts stores and not even online they are all the wrong ones and the ones that would work are aftermarket and expensive youhave any ideas I was thinking getting it machined but because the wholefriction side of flywheel is even eighths non friction part so wouldn't that make the clutch stretch more or have less room to grip?
#40
Lexus Fanatic
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Search for part number 13405-62020 this was used on quite a few cars including the Solara. If your flywheel can be resurfaced the shop doing it will look up the specs to see if there is enough material left.
Thread
Thread Starter
Forum
Replies
Last Post
AirCapital
ES - 1st to 4th Gen (1990-2006)
12
04-11-16 05:44 AM