ES - 1st to 4th Gen (1990-2006) Forum for all 1990 - 2006 ES300 and ES330 models. ES250 topics go here as well.

Rumble and Stiffness

Thread Tools
 
Search this Thread
 
Old 03-31-13, 09:15 PM
  #1  
hubbabubba
Driver School Candidate
Thread Starter
 
hubbabubba's Avatar
 
Join Date: Mar 2013
Location: TX
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
Default Rumble and Stiffness

My 2000 ES300 had started experiencing a few issues: I've addressed most mechanical issues:

New struts, front and rear, new mounts, replaced some leaky gaskets, lines for power steering, all hoses and belts, wiring harness and coils.

Problem is, though, now the ride is extremely stiff and I'm getting a rumbling sound from the rear end. Is there anything that can be done to reduce the stiffness? Did my mechanic do something wrong? What might be causing the low, droning rumbling coming from the rear?

I've loved this car for a long time, but now at 129k in miles, so I want to do things right and keep her around for a while.
Old 03-31-13, 09:57 PM
  #2  
Hayk
Lead Lap
iTrader: (1)
 
Hayk's Avatar
 
Join Date: Feb 2009
Location: NJ
Posts: 4,104
Received 292 Likes on 231 Posts
Default

The stiff ride depends on the struts that were used. Some aftermarket struts are harsher than stock. The rumble could be a side effect of the new suspension. Best would be to ask your mechanic to check it out.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
robbyk
RX - 2nd Gen (2004-2009)
4
01-12-15 07:16 AM
dante1616
ES - 1st to 4th Gen (1990-2006)
3
12-10-11 08:07 AM
zerwick
ES - 1st to 4th Gen (1990-2006)
4
10-01-02 04:10 AM



Quick Reply: Rumble and Stiffness



All times are GMT -7. The time now is 12:24 PM.