Zac007

I recently purchased blue LED license plate light, headlights, and interior glow under the drive and passenger dash. I tried today to plug in the license plate lights today. I had no trouble getting to the point of installation but once I plugged in the lights they wouldn't turn on. I hope this goes without saying but I did turn on the lights first. I didn't go as far as to try the headlights or interior glow. If anyone knows a place or source that has good dependable lights and could point me in that direction that would be greatly appreciate. Just in case its a 2004 ES330. Thanks.

PuReChaos

Try unplugging an flipping the contact points around, LEDs are polar sensitive therefore they must be placed in properly. I suggest unplugging the LED flipping it around, turn on the lights first before reinstalling them, sometimes you'll have to pull the little wires outward from the base of the LED.

Zac007

What should I do if that doesn't work?

01LEXPL

iTrader: (10)

^ means your ebay 0.99$ leds are ****.

http://www.wardenjp.com/stores/

For some reason his ebay store doesn't sell the common bulbs anymore. Just buy from his site direct, cheaper anyways. I used to buy all my LED's from him, still have some that are over 4 years old and still working in the car...

And don't run blue LED's on your tag lights. Gayest 'mod' ever, not to mention I hope the police pull you over and fine you for 'impersonation of a police car' for adding something so distasteful to a Lexus.