ES - 1st to 4th Gen (1990-2006) Forum for all 1990 - 2006 ES300 and ES330 models. ES250 topics go here as well.

2004 ES 330 Sonsor problems

Thread Tools
 
Search this Thread
 
Old 06-11-20 | 02:05 PM
  #1  
Wessam's Avatar
Wessam
Thread Starter
Driver School Candidate
 
Joined: May 2020
Posts: 1
Likes: 0
From: Dubai
Default 2004 ES 330 Sonsor problems

I have Es 330, 2004 with an error code P2241, bank 2 sensor 1.
Any advise to fix it myself and where is the sensor located?
If I have to buy it any recommendations as i tried from Amazon but i find sensor 2.
Thanks a

lot

Last edited by Wessam; 06-11-20 at 02:21 PM.
Old 06-11-20 | 06:45 PM
  #2  
Arsenii's Avatar
Arsenii
Pole Position
 
Joined: Nov 2019
Posts: 2,843
Likes: 810
From: Michigan
Default

Hello,

If I understand correctly, P2241 means that the data sent by Air/Fuel Ratio sensor is lower than ECU expects. It is probably just a bad Air/Fuel Ratio sensor, in your case, it is the one towards the radiator. To make sure, you can warm-up the car, and then take a look at the ECU's live data - A/F sensor output should be around ~2.9-3.3V.

Hope this helps and best of luck!
The following users liked this post:
Wessam (06-12-20)
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Dschwartz
ES - 1st to 4th Gen (1990-2006)
5
03-10-20 02:28 PM
edstofegaj
ES - 1st to 4th Gen (1990-2006)
2
05-18-15 01:08 PM



Quick Reply: 2004 ES 330 Sonsor problems



All times are GMT -7. The time now is 06:05 PM.