ES 350 Lowered on Camry Springs
#1
Driver School Candidate
Thread Starter
Join Date: Jul 2012
Location: TX
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
I searched the forum looking for advice on suspension mods for the ES 350. I wasn't ready to go the coil-over route yet and wanted to try Eibach springs for the Camry since they don't have them for the ES. I couldn't find a definitive answer whether or not they worked on the ES platform.
I bit the bullet and ordered Eibach springs for the 07+ Camry. Had them installed last week and they dropped the car 1-1.4" all around. It's not super aggressive; it just took the large gap in the wheel well away.
The springs fit although the ride quality suffered in the sense that you can hear the shock bottoming out over bumps. It seems like, while the springs fit, they are rated for a lighter car. Highway driving is as smooth as before and I still feel like I have a Lexus ride quality for the most part. In the long-run I will probably go with the coil-over system so I can adjust the height and have a smother ride over bumps.
Hope this helps!
I bit the bullet and ordered Eibach springs for the 07+ Camry. Had them installed last week and they dropped the car 1-1.4" all around. It's not super aggressive; it just took the large gap in the wheel well away.
The springs fit although the ride quality suffered in the sense that you can hear the shock bottoming out over bumps. It seems like, while the springs fit, they are rated for a lighter car. Highway driving is as smooth as before and I still feel like I have a Lexus ride quality for the most part. In the long-run I will probably go with the coil-over system so I can adjust the height and have a smother ride over bumps.
Hope this helps!
Last edited by JVMP58; 08-13-12 at 04:57 PM.
#3
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
I did some looking and the Camry V6 weighs 3495 lbs, and the ES 350 weighs 3580 lbs. I really don't see 85 lbs making a huge difference on car springs, I wonder what is different. I am looking right now for an es350, but I want 20+ wheels and I want to get rid of some of the fender gap.......I have looked everywhere for just springs, and not coil overs, but had no luck. What size wheels are you running?
#5
Driver School Candidate
Thread Starter
Join Date: Jul 2012
Location: TX
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
I did some looking and the Camry V6 weighs 3495 lbs, and the ES 350 weighs 3580 lbs. I really don't see 85 lbs making a huge difference on car springs, I wonder what is different. I am looking right now for an es350, but I want 20+ wheels and I want to get rid of some of the fender gap.......I have looked everywhere for just springs, and not coil overs, but had no luck. What size wheels are you running?
Last edited by JVMP58; 08-21-12 at 04:10 PM.
Trending Topics
#8
Driver School Candidate
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
If you are running OEM shocks still, there lies your issue. By lowering the vehicle, you have reduced the travel of your shocks, thus the bottoming out. When going with lowering springs, it's usually best to also go with a more agressive shock/strut.
#9
Driver School Candidate
Thread Starter
Join Date: Jul 2012
Location: TX
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
I'm probably going to switch to coil-overs soon.
#12
Driver School Candidate
Thread Starter
Join Date: Jul 2012
Location: TX
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
That's defiantly the look I was going for. I wanted to stay with a factory option but something sportier than the original 17" silver multi-spoke.
I will more than likely end up putting the 19" hyper black muti-spoke wheels from the newer IS-F on it.
I will more than likely end up putting the 19" hyper black muti-spoke wheels from the newer IS-F on it.
#14
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Did the OP use the Camry SE springs which if I remember correctly are a different PN than the LE and XLE springs? I believe the SE springs along with SE specific struts and stabilizer bars are used to lower the ride height and stiffen up the handling on the SE. The ES 350 springs, struts and stabilizer bars all have different PNs than any of the associated Camry (any model) parts.......so it isn't all that simple. I think that you'll also find that the curb weight difference is more like 150 lbs (this is comparing a V6 Camry with the ES). You can find the Camry parts here (you do have to select the year, the correct model/product/chassis, and engine): http://www.*******.com/parts/q_U_201...CAMRY_all.html. The Lexus parts are here: http://lexus.sewellparts.com/oem-cat...S350-2011.html edit: some kind of link prevention for the Toyota parts website......see below.
Last edited by oldgrump; 08-27-12 at 08:57 PM. Reason: Replace the asterisks in the address with capital tee, lower case oyo, upper case diy
#15
Driver School Candidate
Thread Starter
Join Date: Jul 2012
Location: TX
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Did the OP use the Camry SE springs which if I remember correctly are a different PN than the LE and XLE springs? I believe the SE springs along with SE specific struts and stabilizer bars are used to lower the ride height and stiffen up the handling on the SE. The ES 350 springs, struts and stabilizer bars all have different PNs than any of the associated Camry (any model) parts.......so it isn't all that simple. I think that you'll also find that the curb weight difference is more like 150 lbs (this is comparing a V6 Camry with the ES). You can find the Camry parts here (you do have to select the year, the correct model/product/chassis, and engine): http://www.*******.com/parts/q_U_201...CAMRY_all.html. The Lexus parts are here: http://lexus.sewellparts.com/oem-cat...S350-2011.html edit: some kind of link prevention for the Toyota parts website......see below.