ES - 5th Gen (2007-2012) Discussion topics related to 2007+ ES350

Vsc and engine light on

Thread Tools
 
Search this Thread
 
Old 04-26-22 | 06:10 PM
  #1  
Jasaveli's Avatar
Jasaveli
Thread Starter
Driver School Candidate
 
Joined: Jul 2017
Posts: 16
Likes: 0
From: Washington
Default Vsc and engine light on

Hello

I have a 08 es350 with vsc light and multiple engine codes.
At first i had a code pointing to my #6 ignition coil and i have fixed that and light went away. Now I'm getting the following codes.

P0352 (showing twice on code reader)
P2240
​​​​​P2237

Any ideas what the culprit could be?

​​
Old 04-26-22 | 06:49 PM
  #2  
spaceballs's Avatar
spaceballs
Intermediate
 
Joined: Aug 2021
Posts: 269
Likes: 77
From: Ontario
Default

Both A/F and O2 sensor going nuts following on from an ignition coil light, probably check the spark plugs in case it was the plug that went bad when the coil went bad?
The following users liked this post:
Jasaveli (04-27-22)
Old 04-26-22 | 06:52 PM
  #3  
dknights's Avatar
dknights
Pit Crew
 
Joined: Jun 2021
Posts: 101
Likes: 33
From: California
Default

Originally Posted by spaceballs
Both A/F and O2 sensor going nuts following on from an ignition coil light, probably check the spark plugs in case it was the plug that went bad when the coil went bad?
I think this is a great place to start.
Old 04-26-22 | 06:57 PM
  #4  
Jasaveli's Avatar
Jasaveli
Thread Starter
Driver School Candidate
 
Joined: Jul 2017
Posts: 16
Likes: 0
From: Washington
Default

Originally Posted by spaceballs
Both A/F and O2 sensor going nuts following on from an ignition coil light, probably check the spark plugs in case it was the plug that went bad when the coil went bad?

That can cause the 02 sensor to go off? Also what's a/f?
Old 04-27-22 | 07:19 AM
  #5  
Clutchless's Avatar
Clutchless
Moderator
 
Joined: May 2005
Posts: 6,046
Likes: 1,225
From: VA
Default

I agree first check your spark plugs but it could be something else.

A/F = Air - Fuel Ratio Sensor - Code P2240 is an indication that the ECM is getting a signal from the air-fuel ratio sensor that it may be shorted or open. The ECM cannot control the fuel properly until the signal is fixed. You may have poor fuel mileage and various poor drive symptoms.


Code P2237 is a code indicating the
O2 sensor heater circuit is open or shorted causing the circuit voltage control to be open. This will cause the fuel feedback control to not work and the ECM to put the engine into failure mode.

​​​​​​P0352 is a generic OBD-II diagnostic trouble code (DTC) that your vehicle's powertrain control module (PCM) or engine control module (ECM) logs when there's an issue with the ignition coil circuit. The trouble code definition for P0352 is “
Ignition Coil B Primary/Secondary Circuit Malfunction”.
The following 2 users liked this post by Clutchless:
99RX300PDX (04-29-22), Jasaveli (04-27-22)
Old 05-01-22 | 07:23 PM
  #6  
Jasaveli's Avatar
Jasaveli
Thread Starter
Driver School Candidate
 
Joined: Jul 2017
Posts: 16
Likes: 0
From: Washington
Default

Just to update i did change all spark plugs but it didn't get resolved. Still getting code p2240, p2237 and p0352.
Old 05-02-22 | 05:30 AM
  #7  
Clutchless's Avatar
Clutchless
Moderator
 
Joined: May 2005
Posts: 6,046
Likes: 1,225
From: VA
Default

Maybe bad coils or 02 sensors but that is a guess based on codes. Rather than throw more parts based on codes, it may actually be useful to have someone more skilled in diagnostics take a look.

You could do some searching at
https://www.toyotanation.com/forums/...ara-04-08.104/

This engine is shared by several other Toyota and Lexus vehicles.

Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
GBunce
LS - 3rd Gen (2001-2006)
11
01-09-24 09:11 AM
TenaClubz
RX - 1st Gen (1999-2003)
13
09-08-20 06:55 PM
06pearlex
IS - 2nd Gen (2006-2013)
14
04-02-11 12:46 PM
relax221
RX - 2nd Gen (2004-2009)
3
07-24-09 06:59 AM
i3urton
RX - 1st Gen (1999-2003)
15
01-04-08 11:01 AM



Quick Reply: Vsc and engine light on



All times are GMT -7. The time now is 12:18 PM.