Clear patches around the lower rear wheel well
#1
Driver
Thread Starter
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
I don't like the clear patches around the lower rear wheel well, still thinking of removing them. They catch dirt and wax around the edges and I just don't like the way they look. After time they may yellow and look dingy too. If waiting a few years to remove them they may leave a ghosting on the paint.
Since I've now installed splash guards I feel these areas will be protected. Thinking of heating them up with a hairdryer to remove them.
Has anyone removed theirs?
Since I've now installed splash guards I feel these areas will be protected. Thinking of heating them up with a hairdryer to remove them.
Has anyone removed theirs?
Last edited by Halfmoon; 04-29-15 at 03:57 AM.
#2
Driver School Candidate
Join Date: May 2013
Location: MA
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
I don't like them either, for the same reasons. However, I have been told that without them, those areas are susceptible to paint chipping from road debris- not sure whether this is speculation, or whether it's based upon actual experience with other model years that did not have the shielding. Still, for me it may be worth taking this risk and removing it, if the protective shielding bugs me enough. Would be interested in other opinions. I have the starfire pearl color, which accentuates the dirt around the edges of the plastic shielding and spoils the "clean" look of the white color.
#3
Lexus Champion
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Halfmoon installed the mud guards which would prevent the splash, spray and rock chips, so its makes sense for him to remove them. If you don't add the guard, I'd think twice about removing them. I think Lexus added the plastic shield for a reason.
#4
Driver School Candidate
Join Date: May 2013
Location: MA
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
I agree that Lexus probably had a reason. I'm just wondering how rear splash guards could be expected to protect the area that is covered by that plastic shield, given that the shield covers the region in front of the rear wheels, not behind them. Perhaps the front splash guards will offer some protection for this area?
#5
Lexus Champion
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
I agree that Lexus probably had a reason. I'm just wondering how rear splash guards could be expected to protect the area that is covered by that plastic shield, given that the shield covers the region in front of the rear wheels, not behind them. Perhaps the front splash guards will offer some protection for this area?
#6
Driver School Candidate
Join Date: May 2013
Location: MA
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
I agree, Lexus would not do it without a good reason. I don't think that the splash guards will offer much protection to that particular area though. I suspect that the area covered by the shield is more vulnerable because of the way that it flares out, catching debris with forward motion (just like the hood and side view mirrors), but I'm guessing...
Trending Topics
#8
Driver
Thread Starter
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
I don't like them either, for the same reasons. However, I have been told that without them, those areas are susceptible to paint chipping from road debris- not sure whether this is speculation, or whether it's based upon actual experience with other model years that did not have the shielding. Still, for me it may be worth taking this risk and removing it, if the protective shielding bugs me enough. Would be interested in other opinions. I have the starfire pearl color, which accentuates the dirt around the edges of the plastic shielding and spoils the "clean" look of the white color.
I agree that Lexus probably had a reason. I'm just wondering how rear splash guards could be expected to protect the area that is covered by that plastic shield, given that the shield covers the region in front of the rear wheels, not behind them. Perhaps the front splash guards will offer some protection for this area?
I have the front splash guards too.
I agree that Lexus wouldn't have put the clear patches there if they weren't needed, but Lexus doesn't offer OEM mud guards for 2013-14 ES350
![Uhh...](https://www.clublexus.com/forums/images/smilies/1387914497.gif)
Winter has returned to MD today
![Mad](https://www.clublexus.com/forums/images/smilies/mad.gif)
.
#9
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
If you are concernced about the dirt and wax building up on them, wash with a high alkaline detergent like regular Dawn. Use a microfiber towel and wash the edges of the film really good. This should remove most if not all of the residue. Keep in mind that Dawn will strip away the wax so apply a good coat of a clear non-residue wax immediately after and you should be good. This is what is recommeded for most clear protection films.
#10
Lead Lap
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
I'm in the camp that believes that the protection is there for a reason, and dealing wax or dirt buildup along the edge of the protective film is not difficult.
#11
Driver
Thread Starter
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
I did it, a little heat and the patches pull off in one piece. It looks a lot better to me.
I'll take the chance the the mud guards will protect this area. If I do find paint damage in the future I'll eat cake and come back here and report it.
I'll take the chance the the mud guards will protect this area. If I do find paint damage in the future I'll eat cake and come back here and report it.
Last edited by Halfmoon; 10-18-14 at 03:07 AM.
#12
Lead Lap
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
[QUOTE=Halfmoon;8468597]I did it, a little heat and the patches pull off in one piece. It looks a lot better to me.
I'll take the chance the the mud guards will protect this area. If I do find paint damage in the future I'll eat cake and come back here and report it.[/QUOTE
I'll try cleaning the edges with Dawn first and then decide.
Just an FYI - I installed front mudguards soon after taking delivery of my new Lexus. The holes in the mudguards matched perfectly with the factory holes - no drilling thru the metal. Not so for the rears. No factory mounting holes. I thought the rear fender was steel and therefore did not want to drill thru the paint for fear of rust. When I found out the rear fenders are plastic I installed the rear mudguards onto them. I used stainless screws and it took about 15 minutes.They look like factory guards. Got them on Ebay for $40. Provides excellent protection for the paint.
I'll take the chance the the mud guards will protect this area. If I do find paint damage in the future I'll eat cake and come back here and report it.[/QUOTE
I'll try cleaning the edges with Dawn first and then decide.
Just an FYI - I installed front mudguards soon after taking delivery of my new Lexus. The holes in the mudguards matched perfectly with the factory holes - no drilling thru the metal. Not so for the rears. No factory mounting holes. I thought the rear fender was steel and therefore did not want to drill thru the paint for fear of rust. When I found out the rear fenders are plastic I installed the rear mudguards onto them. I used stainless screws and it took about 15 minutes.They look like factory guards. Got them on Ebay for $40. Provides excellent protection for the paint.
#14
Lead Lap
#15
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
[QUOTE=bc6152;8468708]
What do you mean the rear fenders are plastic?
I did it, a little heat and the patches pull off in one piece. It looks a lot better to me.
I'll take the chance the the mud guards will protect this area. If I do find paint damage in the future I'll eat cake and come back here and report it.[/QUOTE
I'll try cleaning the edges with Dawn first and then decide.
Just an FYI - I installed front mudguards soon after taking delivery of my new Lexus. The holes in the mudguards matched perfectly with the factory holes - no drilling thru the metal. Not so for the rears. No factory mounting holes. I thought the rear fender was steel and therefore did not want to drill thru the paint for fear of rust. When I found out the rear fenders are plastic I installed the rear mudguards onto them. I used stainless screws and it took about 15 minutes.They look like factory guards. Got them on Ebay for $40. Provides excellent protection for the paint.
I'll take the chance the the mud guards will protect this area. If I do find paint damage in the future I'll eat cake and come back here and report it.[/QUOTE
I'll try cleaning the edges with Dawn first and then decide.
Just an FYI - I installed front mudguards soon after taking delivery of my new Lexus. The holes in the mudguards matched perfectly with the factory holes - no drilling thru the metal. Not so for the rears. No factory mounting holes. I thought the rear fender was steel and therefore did not want to drill thru the paint for fear of rust. When I found out the rear fenders are plastic I installed the rear mudguards onto them. I used stainless screws and it took about 15 minutes.They look like factory guards. Got them on Ebay for $40. Provides excellent protection for the paint.