EJC

We just swapped our 2010 ES350 for a 2016.
Now I had to hardwire the Escort 9500ix Radar Detector
I used a MirrorMount ($36) and Hardwire cable ($15) from The performance Group - radarmount.com
The install was not complicated and was quick
Next to wire in the Dashcam

2gns4me

thank you for the post. I need to do this for my valentine that I have sitting around.

kxaz145

I agree as I will be upgrading my Radar Detector shortly and have thought about a dash cam, too. Doesn't get more descriptive than a good video!

JimB

EJC

Good luck. This is a pretty easy install, especially with the parts I used.
No splicing or soldering of the wiring was a nice plus

EJC

I posted on the Dashcam in a different string. In case you didn't see it here's the video on that one.
I wired them to different harnesses. If I were to do it over I'd probably splice the dash cam lead to the Radar connector lead and use the same connector.

Ratchey

Thank you for this. I was having a hard time getting to the wires to determine polarity and this saved the day.

ESdoesit

EJC - Thank you for posting this video, brought to my attention thanks to bc6152. Just used it to complete installation of my hardwire (rvm tap) for my new Uniden in my '17 ES 300h. I was lost as to which plug/wires to use, your video matched my wiring precisely and made hookup a breeze!

ESdoesit

EJC - Thank you for posting this video, brought to my attention thanks to bc6152. Just used it to complete installation of my hardwire (rvm tap) for my new Uniden in my '17 ES 300h. I was lost as to which plug/wires to use, your video matched my wiring precisely and made hookup a breeze!

Harpreet

Hi.. which color wires do have power supply 24x7? I have a dash cam with parking surveillance.
thanks

EJC

I don't recall which is 12V constant, Use a vom and a sewing pin to find a live line.
Doesn't the camera have a battery and bump sensor?

Harpreet

Thanks. No the camera battery is only for the clock and to preserve the data. May be it lasts for a minute or so.

heidihidin

are there still uniden detectors being made??
does it work well? what model?