ES - 6th Gen (2013-2018) Discussion topics related to 2013+ ES models

Stereo Upgrade

Thread Tools
 
Search this Thread
 
Old 12-03-21, 06:23 AM
  #46  
slvrshrk9
Driver School Candidate
 
slvrshrk9's Avatar
 
Join Date: Dec 2021
Location: KY
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Default

This is dope i love it! just got a new 2015 es350 with 60k on it and want to do a 10" sub and speaker replacement. nice job i bet it sounds good
Old 05-06-22, 08:55 AM
  #47  
F1lthyR1ch
3rd Gear
 
F1lthyR1ch's Avatar
 
Join Date: Feb 2022
Location: ON
Posts: 3
Received 0 Likes on 0 Posts
Default

Hey Ratchey, sorry, I know this is an old thread, but I had a question about when you routed the power wire through the firewall. I was going through a grommet on the passenger side footwell. All is good going from the engine bay, but it feels like there is another grommet on the passenger cabin side. I can only feel it and definitely isn't a line of sight to the grommet. Did you remove the lower passenger side dash, air bag, etc to get to that area? Or just force it through by touch?
Old 05-09-22, 04:12 AM
  #48  
ptthere
Pit Crew
 
ptthere's Avatar
 
Join Date: Jan 2022
Location: IA
Posts: 100
Received 44 Likes on 38 Posts
Default

Originally Posted by F1lthyR1ch
Hey Ratchey, sorry, I know this is an old thread, but I had a question about when you routed the power wire through the firewall. I was going through a grommet on the passenger side footwell. All is good going from the engine bay, but it feels like there is another grommet on the passenger cabin side. I can only feel it and definitely isn't a line of sight to the grommet. Did you remove the lower passenger side dash, air bag, etc to get to that area? Or just force it through by touch?
The best/easiest location I found was slightly under the steering shaft where it goes through the firewall. There's an elongated rubber grommet than extends down a couple inches or more away from the assembly. You'll have to pull the carpet and insulation away a few inches from the inside to get that low. Poke or bore a small hole through it (smaller than your wiring) then carefully feed your wire through it.
The following 2 users liked this post by ptthere:
F1lthyR1ch (05-11-22), mellwhead (05-19-22)
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
fdylan
SC- 1st Gen (1992-2000)
4
07-08-16 03:26 PM
azkaty
SC430 - 2nd Gen (2001-2010)
4
03-13-11 03:33 PM
Evel
GS - 3rd Gen (2006-2011)
12
07-24-08 09:05 PM
vondy21
Lexus Audio, Video, Security & Electronics
29
05-28-03 03:02 PM



Quick Reply: Stereo Upgrade



All times are GMT -7. The time now is 12:12 AM.