When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Yes actually took me 35 minutes to Install, they say 60-90 if you don’t really work on cars on a regular. And my car definitely doesn’t lag any more and response wAyyyy better. It took 3 days for the car’s computer to recognize the intake with the extra air flow.
Did you use a dry cone filter or a reusable (oiled) filter? I'm so nervous about an oiled filter fouling my MAF sensor and throwing a code.
But, then again, the oiled filter CAI's on my present Ford Ranger and former Dodge Neon never threw codes.
Did you use a dry cone filter or a reusable (oiled) filter? I'm so nervous about an oiled filter fouling my MAF sensor and throwing a code.
But, then again, the oiled filter CAI's on my present Ford Ranger and former Dodge Neon never threw codes.
Honestly whatever the kit came with, everything is plug and play.. car doesn’t throw any codes.. drives amazing honestly, and response so quickly max I love it.
Question for Canmar8732: Was the AEM Cold Air Intake an easy 60-90 minute install like the AEM website claims? Did you run into any problems?
Also, did you notice any increase in intake noise under heavy throttle?
Thanks.
Also there was an increase in intake noise, car sounds very aggressive and sporty.. if that’s not what your looking for I don’t suggest it for you in that end
Added these wheels momentarily, waiting on Ferrada wheels to come out with 21’s next month
can i ask where you got the side skirts rear sunroof spoiler and rear splitters and front lip from? I've been searching forever and can only find ebay ones.
can i ask where you got the side skirts rear sunroof spoiler and rear splitters and front lip from? I've been searching forever and can only find ebay ones.
I got them all from eBay, but nia designs makes front sides and rear lip kit
I have tried so many spray waxes / sealants to the extent that i think i can give you some good experience feedback.
I have tried the P & S Bead Maker , Griots Garage , Adam's Polishes , Turtle wax spray wax and the new turtle wax Seal and Shine. And the turtle wax spray wax was the best wax i have ever used, by ease of application , gloss value and hydrophobic properties. I also believe the Spray Wax is better than their new product the Seal n Shine.
With that all said , the hybrid ceramic wax is on another level. The depth it provides to the color and the gloss is second to none. And it repels water extremely well. The important part of the hybrid ceramic wax is the application. You do not apply it like a regular wax rather you apply it while the car is wet and rinse it off. If you have no protection on your paint (like previous waxes) you first have to lay down a base coat of the ceramic wax by distributing it with a drying towel, and then coming back for a 2nd coat while the car is wet and just rinse it off.
I used Meguiar's Hybrid Ceramic Wax on my three week old Atomic Silver ES 350. After washing it very well and applying it in the two step process described in the videos, my 2019 ES 350 looked very good - really slick,shiny and sparkly. I then took it on a nine hour round trip weekend drive and it looked much more clean than I would have expected after that long a trip.
FYI, the AEM 21-827C Cold Air Intake System is showing as "out of stock" on the AEM website. Looks like the Camry, Avalon & ES350 people are snapping this unit up.
Maybe some of their retailers have some left.
I sent a note to AEM asking when they expect this CAI to be back in stock.
FYI, the AEM 21-827C Cold Air Intake System is showing as "out of stock" on the AEM website. Looks like the Camry, Avalon & ES350 people are snapping this unit up.
Maybe some of their retailers have some left.
I sent a note to AEM asking when they expect this CAI to be back in stock.
i purchased mine in car-id they still have if I’m not mistaking
Looking for answers on how to cleanly conceal this cable. Is there something that auto customization people use to tape things into place. I want to secure it next to the ridge to the right of the cable.
Looking for answers on how to cleanly conceal this cable. Is there something that auto customization people use to tape things into place. I want to secure it next to the ridge to the right of the cable.
3M double-sided extreme tape is what I would suggest for an easy fix. That's what I used to attach my sub amp and digital processor *****. They haven't fallen off all summer.
I thought about doing the same thing but that part of the cable showing above the home button bothered me so decided not to do it. When I have some time I'll run the cable underneath by making some adjustments.
09-16-19, 11:04 AM
