Pics of your 7ES - RIGHT NOW!
The following 4 users liked this post by GoOil97:
The following 7 users liked this post by Stupefacie:
ATL350 (12-15-22),
droclex (12-20-22),
es250fsport (04-04-24),
GoOil97 (12-15-22),
GS350Miami (12-16-22),
and 2 others liked this post.
The following users liked this post:
GS350Miami (12-17-22)
#20
Lexus Test Driver
iPhone 14 Pro pic... still aiming for that lift kit. It looks nice and high though, wouldn't mind a half inch raise/lift.
Also I re-did the tint, just paid someone to do it. 20% rear, 30% front.
Also I re-did the tint, just paid someone to do it. 20% rear, 30% front.
The following 3 users liked this post by E46CT:
#21
Instructor
You might be a candidate for the new Homer Simpson looking Toyota Crown. It's a lifted AWD sedan that's basically the same size.
#22
Pole Position
iTrader: (5)
LOL, literally the pic above yours is a guy who scrapes the entire underside of his car as he drives down the road and you want to lift yours
You might be a candidate for the new Homer Simpson looking Toyota Crown. It's a lifted AWD sedan that's basically the same size.
You might be a candidate for the new Homer Simpson looking Toyota Crown. It's a lifted AWD sedan that's basically the same size.
I only park low whole point of bags is to keep it driveable without damaging things
#23
Lexus Test Driver
yup! any kind of lift kit would do. maybe 1/2" lift using 3D printed plastic blocks/spacers i can fit between the springs coils. It'll never happen but someone should come out with a mod. that would be extra cool.
I'm happy with the current height but tempted at a subtle lift kit. It would compliment well with a Members Only jacket and a newspaper.
Back in the old days the 3 series guys would install what BMW offered from the factory as a "Lift kit" aka "Rough road package" with consisted of spring spacing blocks/pads and strut/shock tower metal reinforcement plates. Most of us installed half of the package (bought separately from BMW) and skipped the spacers, but some did install the spacers. BMW actually sold 3 different "lift heights" if i recall correctly. The guys that bought into that package were well beyond their years!
I'm happy with the current height but tempted at a subtle lift kit. It would compliment well with a Members Only jacket and a newspaper.
Back in the old days the 3 series guys would install what BMW offered from the factory as a "Lift kit" aka "Rough road package" with consisted of spring spacing blocks/pads and strut/shock tower metal reinforcement plates. Most of us installed half of the package (bought separately from BMW) and skipped the spacers, but some did install the spacers. BMW actually sold 3 different "lift heights" if i recall correctly. The guys that bought into that package were well beyond their years!
The following 2 users liked this post by Wihunge:
E46CT (12-20-22),
mike995134 (12-24-22)
#25
Sleek & Unique
My 2019 Luxury ES, with NIA Body Kit & 19” Wheels
Added a painted back valence to NIA Body kit
Last edited by Danno1958; 06-27-23 at 07:10 AM. Reason: Added custom back valence
#27
Washed it yesterday and snapped these pics today
The following 2 users liked this post by Jack1986:
E46CT (12-21-22),
mike995134 (12-24-22)
#28
Lexus Test Driver
^beautiful and professional red F Sport. but make sure you clean the inside of the wheel wells too after a nice detail like yours. i always polish the wheel wells for full effect. make sure the car looks like it rolled off the truck!
The following users liked this post:
ATL350 (12-21-22)
#29
Great advice. It’s sad to see a car someone has spent hours beautifully detailing and they have grey, dingy wheel wells.
The following users liked this post:
E46CT (12-21-22)
#30
Lexus Test Driver
The plastics are easy thankfully. and with constant upkeep, they are easy to wipe clean every wash. the carpeted section can be a bit more difficult. i would buy a soft dedicated brush for it. soft bristles.