CAN-Other 3ES 97-01, Headlights [OEM] & Clear Corners [aftermarket]
01-31-13, 10:15 AM
#1
3ES 97-01, Headlights [OEM] & Clear Corners [aftermarket]
Hey guys, selling off my left over parts from my conversion. Don't need them, the retrofit isn't going to happen since i have the OEM HID's now... NEED GONE ASAP! NO room in garage storage bin.
Headlights, really clean lenses [just polished them as well for the buyer]. Driver side tab cracked so i did a quick fix, sturdy enough IMO... it was bought from ebay [as i've went thru a couple of sets on my car with aftermarket headlights, etc], and the seller epoxied the tab on... when working on it in -30c weather the epoxy let go and it snapped. I never even noticed it was epoxied. So i added a bracket and screwed it together. I got some generic DRL bulbs in there now, and including H7 HID bulbs... they have one year on them, and are 4300k temp. So the H7 adapter has been modified and the bulbs are secured and covered from the elements. Just plug in some ballasts of your own!
Now, I see beat headlights on ebay motors for 100ish [each] prior to shipping. Im giving CL dibs as i will be posting these on ebay & other means in 24hrs from now so act fast. I'm looking for 250$ shipped for the pair OBO *not splitting up* Ideal for retrofit, or lens swap or 'just in case' set of light when retro'ing your own...
Clear corners, 40$ shipped
The rubber cover on the top part is loose. I suggest simply krazy-gluing it, or silicone/caulking. As i've already did it on the one on the bottom.
Either way its a 10sec fix, but i don't feel like doing it since all my silicone stuff is frozen in the garage. Comes with bulbs! * purchased during spring 2012, installed in summer and taken off one week ago... looking to get what i paid off CL last year.
I only take paypal (send as gift or add 3%), i'll ship whatever is cheapest/quickest. Given its size the headlights will probably be expedited to you, and the corners might be regular airmail.
If anything, make an offer... worst that will happen is a LOL at you!
-Mike
Headlights, really clean lenses [just polished them as well for the buyer]. Driver side tab cracked so i did a quick fix, sturdy enough IMO... it was bought from ebay [as i've went thru a couple of sets on my car with aftermarket headlights, etc], and the seller epoxied the tab on... when working on it in -30c weather the epoxy let go and it snapped. I never even noticed it was epoxied. So i added a bracket and screwed it together. I got some generic DRL bulbs in there now, and including H7 HID bulbs... they have one year on them, and are 4300k temp. So the H7 adapter has been modified and the bulbs are secured and covered from the elements. Just plug in some ballasts of your own!
Now, I see beat headlights on ebay motors for 100ish [each] prior to shipping. Im giving CL dibs as i will be posting these on ebay & other means in 24hrs from now so act fast. I'm looking for 250$ shipped for the pair OBO *not splitting up* Ideal for retrofit, or lens swap or 'just in case' set of light when retro'ing your own...
Clear corners, 40$ shipped
The rubber cover on the top part is loose. I suggest simply krazy-gluing it, or silicone/caulking. As i've already did it on the one on the bottom.
Either way its a 10sec fix, but i don't feel like doing it since all my silicone stuff is frozen in the garage. Comes with bulbs! * purchased during spring 2012, installed in summer and taken off one week ago... looking to get what i paid off CL last year.
I only take paypal (send as gift or add 3%), i'll ship whatever is cheapest/quickest. Given its size the headlights will probably be expedited to you, and the corners might be regular airmail.
If anything, make an offer... worst that will happen is a LOL at you!
-Mike
Thread
Thread Starter
Forum
Replies
Last Post
ALLWiTE2JZ
SC- 1st Gen (1992-2000)
13
11-01-10 02:16 PM
