(Free food and beer for Labor) Friday towers alternative
#49
Lexus Test Driver
Thread Starter
iTrader: (1)
Join Date: Dec 2008
Location: fl
Posts: 1,540
Likes: 0
Received 0 Likes
on
0 Posts
have anybody actually pulled a motor before
i will swing by and help get her done quickly .. robert do you have air tools
is your car in the garage or in driveway... if you could disconnect drive shaft and have car sitting on 4 jack stands before we arrive and also unplug your ecu ..it might be easier to disconnect plugs on harness in engine bay if you have safc, fcd etc wired in down by ecu , just too many wires to deal with.. how many jacks do you have ..
lmk if you need anything else
i will swing by and help get her done quickly .. robert do you have air tools
is your car in the garage or in driveway... if you could disconnect drive shaft and have car sitting on 4 jack stands before we arrive and also unplug your ecu ..it might be easier to disconnect plugs on harness in engine bay if you have safc, fcd etc wired in down by ecu , just too many wires to deal with.. how many jacks do you have ..
lmk if you need anything else
Mr, Lexforlife
based on your first quote which I'm crying over (laughing so hard) do you really think that we all just drop our cars off at the shop and pick them up when done? Truthfully I personally was just a little insulted by that comment as the last time I checked after 4 motors in 9yrs 3 trannys, 2 driveshafts, 2 diffs, 2 heads, and atleast 2 rear subframes all done on the ground with jack stands I've come to the conclusion that I really need your help should I change the blinker fluid and muffler bearings while we are trying to figure out how to get the car off the ground or do it afterwards is it lefty tighty righty loosey and all the tools I really need are 3/8, 9/16,1/2,5/8 open end sockets on this Japan built automobile!!!LMAO
The second quote is my all time favorite should I get Robert to swing by the store and pick up some gray poupon mustard or maybe some cheese to go with your wine cause the last I checked pork is on Jamaican menus everywhere!!
P.s. Burger King slogan HAVE IT YOUR WAY
#50
Lexus Fanatic
iTrader: (7)
Mr, Lexforlife
based on your first quote which I'm crying over (laughing so hard) do you really think that we all just drop our cars off at the shop and pick them up when done? Truthfully I personally was just a little insulted by that comment as the last time I checked after 4 motors in 9yrs 3 trannys, 2 driveshafts, 2 diffs, 2 heads, and atleast 2 rear subframes all done on the ground with jack stands I've come to the conclusion that I really need your help should I change the blinker fluid and muffler bearings while we are trying to figure out how to get the car off the ground or do it afterwards is it lefty tighty righty loosey and all the tools I really need are 3/8, 9/16,1/2,5/8 open end sockets on this Japan built automobile!!!LMAO
The second quote is my all time favorite should I get Robert to swing by the store and pick up some gray poupon mustard or maybe some cheese to go with your wine cause the last I checked pork is on Jamaican menus everywhere!!
P.s. Burger King slogan HAVE IT YOUR WAY
based on your first quote which I'm crying over (laughing so hard) do you really think that we all just drop our cars off at the shop and pick them up when done? Truthfully I personally was just a little insulted by that comment as the last time I checked after 4 motors in 9yrs 3 trannys, 2 driveshafts, 2 diffs, 2 heads, and atleast 2 rear subframes all done on the ground with jack stands I've come to the conclusion that I really need your help should I change the blinker fluid and muffler bearings while we are trying to figure out how to get the car off the ground or do it afterwards is it lefty tighty righty loosey and all the tools I really need are 3/8, 9/16,1/2,5/8 open end sockets on this Japan built automobile!!!LMAO
The second quote is my all time favorite should I get Robert to swing by the store and pick up some gray poupon mustard or maybe some cheese to go with your wine cause the last I checked pork is on Jamaican menus everywhere!!
P.s. Burger King slogan HAVE IT YOUR WAY
no insult were meant mr mac tool guy
judge how you want but i will be there to help out robert
#52
Pole Position
iTrader: (3)
have anybody actually pulled a motor before
i will swing by and help get her done quickly .. robert do you have air tools
is your car in the garage or in driveway... if you could disconnect drive shaft and have car sitting on 4 jack stands before we arrive and also unplug your ecu ..it might be easier to disconnect plugs on harness in engine bay if you have safc, fcd etc wired in down by ecu , just too many wires to deal with.. how many jacks do you have ..
lmk if you need anything else
i will swing by and help get her done quickly .. robert do you have air tools
is your car in the garage or in driveway... if you could disconnect drive shaft and have car sitting on 4 jack stands before we arrive and also unplug your ecu ..it might be easier to disconnect plugs on harness in engine bay if you have safc, fcd etc wired in down by ecu , just too many wires to deal with.. how many jacks do you have ..
lmk if you need anything else
Mr, Lexforlife
based on your first quote which I'm crying over (laughing so hard) do you really think that we all just drop our cars off at the shop and pick them up when done? Truthfully I personally was just a little insulted by that comment as the last time I checked after 4 motors in 9yrs 3 trannys, 2 driveshafts, 2 diffs, 2 heads, and atleast 2 rear subframes all done on the ground with jack stands I've come to the conclusion that I really need your help should I change the blinker fluid and muffler bearings while we are trying to figure out how to get the car off the ground or do it afterwards is it lefty tighty righty loosey and all the tools I really need are 3/8, 9/16,1/2,5/8 open end sockets on this Japan built automobile!!!LMAO
The second quote is my all time favorite should I get Robert to swing by the store and pick up some gray poupon mustard or maybe some cheese to go with your wine cause the last I checked pork is on Jamaican menus everywhere!!
P.s. Burger King slogan HAVE IT YOUR WAY
based on your first quote which I'm crying over (laughing so hard) do you really think that we all just drop our cars off at the shop and pick them up when done? Truthfully I personally was just a little insulted by that comment as the last time I checked after 4 motors in 9yrs 3 trannys, 2 driveshafts, 2 diffs, 2 heads, and atleast 2 rear subframes all done on the ground with jack stands I've come to the conclusion that I really need your help should I change the blinker fluid and muffler bearings while we are trying to figure out how to get the car off the ground or do it afterwards is it lefty tighty righty loosey and all the tools I really need are 3/8, 9/16,1/2,5/8 open end sockets on this Japan built automobile!!!LMAO
The second quote is my all time favorite should I get Robert to swing by the store and pick up some gray poupon mustard or maybe some cheese to go with your wine cause the last I checked pork is on Jamaican menus everywhere!!
P.s. Burger King slogan HAVE IT YOUR WAY
You've got to love how a thread to help out a CL member has now turned into drama!!!
#55
Lexus Test Driver
Thread Starter
iTrader: (1)
Join Date: Dec 2008
Location: fl
Posts: 1,540
Likes: 0
Received 0 Likes
on
0 Posts
Since we are on the hooked on phonics subject you might note that HAS is a better word to use then have when it comes to asking ????
have anybody pulled a motor???
hooked on phonics version>>> Has anybody pulled a motor
Please let me know when the home version comes out with the official CL definitions of all the different avatars!!
have anybody pulled a motor???
hooked on phonics version>>> Has anybody pulled a motor
Please let me know when the home version comes out with the official CL definitions of all the different avatars!!
#56
Lexus Fanatic
iTrader: (7)
Since we are on the hooked on phonics subject you might note that HAS is a better word to use then have when it comes to asking ????
have anybody pulled a motor???
hooked on phonics version>>> Has anybody pulled a motor
Please let me know when the home version comes out with the official CL definitions of all the different avatars!!
have anybody pulled a motor???
hooked on phonics version>>> Has anybody pulled a motor
Please let me know when the home version comes out with the official CL definitions of all the different avatars!!
#60