hey everyon was up...after three years of ownin my sc 400 i decided to keep the v8 and see what i can do with it...so as of sunday offically starts my build (single turbo).. i just bought a 2010 corolla thats the only car my wife let me get i was going for a evo but failled...anyways now i have time to work on the v8 cuz it was my daily drive so if anyone interested i should have pics and work on a nice thread for enterrtainment within the week ....any advice would b appricated thanks

 

Good luck with the single turbo setup! What year is your SC400? Depending on how much boost you want to run you might or might not need to change your pistons. Lextreme has some of the performance parts that you will need like the manifold flanges for instance. Glad to see a thread like this every once in awhile.

 

Lextreme has a A 800rwhp Capable Forged Internals For the 1UZ for a good price, What tranny are you going to be using?

 

i have a 94 sc400 with 150K... for right now im reasearchin how much boost the stock internals can handle and if it decent ill just clean up the motor and use the stock internals if it doesnt make sence ill build it up pistons heads etc..... pics should start comming in tommorow thanks

 

i was thinkin the supra 6 speed swap unless u have another route that may b better..... and as for the internals im not sure if i want to have those big numbers yet but its in my mind still so ill see was up thanks

 

Unless you have the cash to be pouring out somewhere that 6 speed supra trans runs around 3g's. If your going to be running around 450hp range you can use the r-154 trans and be okay with that setup. The newly designed r-154 adaptor just came out for the 1uz locally instead of new zeland or somewhere in that area. Couple buddies had a lot of requests for that cause they sell the w58 adaptor. Make sure all of the maintance stuff is done on the car cause you have a lot of miles on it.

 

In your looking at the 300whp range -W58, if you are looking at the range of upper 700whp - R154... check out www.quantum-auto.com

 

Look into it, i was just saying i was planning on doing this when i was aiming for 550hp but then i went an alternate route and went with a LSx motor

 

whats the range of the w58 300 to mabye like 450hp???

 

hey here is the start i just got my 2010 corolla last week S type for my new daily driver...saves a hella lot on gas and now to my build of my 94 sc400 pics will be posted as i start tearin apart and what not !!

 

nice looking Lex lol, and i believe that the limit on the w58 is like 400 at the very max.....maybe 450 with a valve body upgrade.....

 

^^thanks so i may go w58 for now then cuz thats my range at the moment..but who know it may change as i start putting it together

 

W58s don't have valve bodies.

Ive made right around 450 for 3 years with a W58 and never broke it.

 

do a th400,or a 700r tranny....can handle all the power that engine will ever make and you can get a fresh built one with warranty for around 500 maybe less..and all the other parts needed you will be only in like 1000-1500 range for a built tranny...just another idea for you..good luck with the build,i am just about done with my sc400 single setup,so if you have any questions lmk

 

^^^^just asking im going day by day spending money on this project how much just a estimate how much u spend so i know i wont b getin ripd off lol