Funny Race Video!
#17
Im Pretty Sure If Our Guys Ran Tires Like The Mustang We Wont Have To Worry About Traction Problems!
#19
Now check out this guys built sheet. I say 600-750 is more like it..
Here is the whole build sheet!!!
http://www.insanespeed.net/ PAGE 2 GREY Evo!!!!
Engine
Full Insane Speed Built 2.3L Stroker
Crower Pro Series Billet Rods
ARP Rod Bolts
4G64 crankshaft 102mm stroke
CP Forged 9.5:1 Pistons
Crower Plasma Rings
ACL Race Bearings
ARP Main Bolts
Balance Shaft Eliminator
Insane Speed (Insane Spec Head)
SuperTech dual stainless steel valve springs
SuperTech titanium retainers, locaters, and locks
New Valve Seals
Custom Bronze valve guides
Supertech Nitride Coated Intake Valves
Supertech Inconel Exhaust Valves
Stainless O-ring around each combustion chamber
Complete port & polish
ARP Head Studs
GSC Stage II Cams
Virtual Works Racing Aluminum Intake Manifold
Boomba Racing Billet 75mm Throttle Body
4 inch Aluminum Intake
Avid Billet front and side engine mounts
Greddy Radiator Cooling Panel
Silver Painted Valve Cover
BLE Billet Timing Tensioner
Sparktech COP Non-CDI Ignition
Fluidampr Harmonic Balancer
Power Enterprises Kevlar Timing Belt
Power Enterprises Kevlar Accessory Belt
#20
Lexus Champion
4-500ish, C'mon to you. I just sold my Evo8 which makes 590whp with a stock motor.
Now check out this guys built sheet. I say 600-750 is more like it..
Here is the whole build sheet!!!
http://www.insanespeed.net/ PAGE 2 GREY Evo!!!!
Engine
Full Insane Speed Built 2.3L Stroker
Crower Pro Series Billet Rods
ARP Rod Bolts
4G64 crankshaft 102mm stroke
CP Forged 9.5:1 Pistons
Crower Plasma Rings
ACL Race Bearings
ARP Main Bolts
Balance Shaft Eliminator
Insane Speed (Insane Spec Head)
SuperTech dual stainless steel valve springs
SuperTech titanium retainers, locaters, and locks
New Valve Seals
Custom Bronze valve guides
Supertech Nitride Coated Intake Valves
Supertech Inconel Exhaust Valves
Stainless O-ring around each combustion chamber
Complete port & polish
ARP Head Studs
GSC Stage II Cams
Virtual Works Racing Aluminum Intake Manifold
Boomba Racing Billet 75mm Throttle Body
4 inch Aluminum Intake
Avid Billet front and side engine mounts
Greddy Radiator Cooling Panel
Silver Painted Valve Cover
BLE Billet Timing Tensioner
Sparktech COP Non-CDI Ignition
Fluidampr Harmonic Balancer
Power Enterprises Kevlar Timing Belt
Power Enterprises Kevlar Accessory Belt
Now check out this guys built sheet. I say 600-750 is more like it..
Here is the whole build sheet!!!
http://www.insanespeed.net/ PAGE 2 GREY Evo!!!!
Engine
Full Insane Speed Built 2.3L Stroker
Crower Pro Series Billet Rods
ARP Rod Bolts
4G64 crankshaft 102mm stroke
CP Forged 9.5:1 Pistons
Crower Plasma Rings
ACL Race Bearings
ARP Main Bolts
Balance Shaft Eliminator
Insane Speed (Insane Spec Head)
SuperTech dual stainless steel valve springs
SuperTech titanium retainers, locaters, and locks
New Valve Seals
Custom Bronze valve guides
Supertech Nitride Coated Intake Valves
Supertech Inconel Exhaust Valves
Stainless O-ring around each combustion chamber
Complete port & polish
ARP Head Studs
GSC Stage II Cams
Virtual Works Racing Aluminum Intake Manifold
Boomba Racing Billet 75mm Throttle Body
4 inch Aluminum Intake
Avid Billet front and side engine mounts
Greddy Radiator Cooling Panel
Silver Painted Valve Cover
BLE Billet Timing Tensioner
Sparktech COP Non-CDI Ignition
Fluidampr Harmonic Balancer
Power Enterprises Kevlar Timing Belt
Power Enterprises Kevlar Accessory Belt
#21
A gt35r will make probably 680 at the most with the boost turned all the way up. But that still doesn't look like traction issues to me.
It all depends on compression ratio. A 9to1 motor can make 680 but a 10 to 1 motor will make more. My Evo has an FPblack which is close to a gt35r. These cars have made pass 700whp with these turbos..Still not 400-500 tho!
It all depends on compression ratio. A 9to1 motor can make 680 but a 10 to 1 motor will make more. My Evo has an FPblack which is close to a gt35r. These cars have made pass 700whp with these turbos..Still not 400-500 tho!
#22
Lexus Champion
My bro has a FP Red on his X.
#23
No problem. Hope you did not take it the wrong way. I just have some experience with these cars.. Yeah man they are pretty incredible. My friend Richard has an evo9 that make 8++whp and my other buddy Carlos has one that makes 840 and they boggie..Doug
If you see either of these two evos in the streets I recommend that you don't try them. none of us can hang with them..
RICHARDS EVO9
Carlos evo8
If you see either of these two evos in the streets I recommend that you don't try them. none of us can hang with them..
RICHARDS EVO9
Carlos evo8
Last edited by rdt; 07-31-11 at 09:46 PM.
#24
Lexus Champion
Nah its cool. Wouldn't that be awhp? My brothers only made I think it was 488/486 @ 41lbs. I think it was on meth at the time.
#28
Lexus Champion
iTrader: (31)
Lol on a stock evo 9 turbo on my car at 35 psi I can spin all 4 1st through 3rd on the street and on a poorly prepped track so on a 35r with a .63 hot side it will come alive fast and spin as it did in the vid.
Remember spinning in an awd car is nothing like a 2wd car as it is hooking at the same time so it sounds like a slipping clutch.
Remember spinning in an awd car is nothing like a 2wd car as it is hooking at the same time so it sounds like a slipping clutch.
#29
Lexus Champion
Thats ridiculous but I'm not suprised. Smaller engines call for more boost.
This ETS Evo is pushing 55 psi which is insane.
http://www.youtube.com/watch?v=ESluR...eature=related
This ETS Evo is pushing 55 psi which is insane.
http://www.youtube.com/watch?v=ESluR...eature=related
Thread
Thread Starter
Forum
Replies
Last Post
PhilipMSPT
Car Chat
1
07-18-13 09:46 AM