1st Genners with 17" 2nd gen rims
#17
1st Generation with 17's
Here is a pic when I had the 17's on my 95, just eibachs no spacers,but they since been put on my 2001, but my 95 did look damn good with them, maybe thats why I can't sell the thing.......but I might have to keep it and put the wheels back on it when I get the 20's for my new GS.....
#18
Pole Position
iTrader: (3)
For those running spacers: are there any detrimental effects from this?? Like increased stress on suspension components?
And you're only running spacers on the rear as I had previously read, correct??
I bought a set of 2nd gen wheels from a couple of guys on here, but have yet to mount them.
-Ken-
And you're only running spacers on the rear as I had previously read, correct??
I bought a set of 2nd gen wheels from a couple of guys on here, but have yet to mount them.
-Ken-
#19
Driver School Candidate
Join Date: Aug 2004
Location: Missouri
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
Hey, im new here. I've got a first gen with IS300 17" wheels, and no spacers. I'm planning on doing a lot of work around christmas time, and a nice spring/strut set up with some spacers is in the mix. Heres how it looks now...
#20
Racer
Originally posted by AlexR
Hey, im new here. I've got a first gen with IS300 17" wheels, and no spacers. I'm planning on doing a lot of work around christmas time, and a nice spring/strut set up with some spacers is in the mix. Heres how it looks now...
Hey, im new here. I've got a first gen with IS300 17" wheels, and no spacers. I'm planning on doing a lot of work around christmas time, and a nice spring/strut set up with some spacers is in the mix. Heres how it looks now...
So what mod's are on your list.
#21
Lexus Champion
Join Date: Oct 2001
Location: el clinico magnifico
Posts: 3,417
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by AlexR
Hey, im new here. I've got a first gen with IS300 17" wheels, and no spacers. I'm planning on doing a lot of work around christmas time, and a nice spring/strut set up with some spacers is in the mix. Heres how it looks now...]
Hey, im new here. I've got a first gen with IS300 17" wheels, and no spacers. I'm planning on doing a lot of work around christmas time, and a nice spring/strut set up with some spacers is in the mix. Heres how it looks now...]
#22
Driver School Candidate
Join Date: Aug 2004
Location: Missouri
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
As far as mods go, my rotors are warped beyond all hell so I think im going to upgrade to a nice set of cross drilled/slotted rotors, maybe some new calipers if i can afford them, and then obviously some nice pads.. I would like to get the Eibach pro-kit tahts available for this car, but I'm undecided on what type of shocks/struts to get(any suggestions?). I need to go ahead and buy a set of IS300 center caps also. Clear corners are a must with the silver, the yellow/orange throws it all off, so I'd like to do that also.
Here is the only other pic i have, and the IS300 wheels dont fill up the wheel well very well, but, I only got the car in may when i turned 16, and they are deff. the best bang for your buck, only costing $450 with tires (even though they're kumho's )
Here is the only other pic i have, and the IS300 wheels dont fill up the wheel well very well, but, I only got the car in may when i turned 16, and they are deff. the best bang for your buck, only costing $450 with tires (even though they're kumho's )
#23
Thread
Thread Starter
Forum
Replies
Last Post
NCLexi250
Suspension and Brakes
5
04-28-12 06:32 PM