GS - 1st Gen (1993-1997) Discussion about the first generation GS300

Help!!! clicking sound

Thread Tools
 
Search this Thread
 
Old 08-02-07 | 07:25 PM
  #1  
95gs300's Avatar
95gs300
Thread Starter
Pole Position
 
Joined: May 2007
Posts: 265
Likes: 1
From: fl
Default Help!!! clicking sound

My car has been making a clicking sound by the left front (driver side) for about three days now, I orginally thought it was the wheel bearing since it was somewhat loose about two weeks ago, and was going to fix it when I got a chance. But after I replace it the noise is still there, I don't think its the engine since the noise goes faster when I speed up, but not when I rev the engine. I don't think its the drive shaft because when I was driving I put the car in nuetral and the noise still continues. I don't think its the brakes becuase when I brake whether hard or soft the noise is still there. And I put the car on a lift and the tire had no play so I don't think its the wheel bearing, also a mechanic told me that it dosen't sound like a wheel bearing but at the same time he said he never heard a car make that sound. So I have no idea what to do. The clicking sound, sounds like the little kids with a bike that put a baseball card on thier tire, also the car shake violently at 25+. Any ideas will help thanks....
Old 08-02-07 | 07:41 PM
  #2  
Kaiser's Avatar
Kaiser
Racer
iTrader: (1)
 
Joined: Nov 2004
Posts: 1,831
Likes: 0
From: Arizona
Default

Ball Joints.
Old 08-02-07 | 07:46 PM
  #3  
95gs300's Avatar
95gs300
Thread Starter
Pole Position
 
Joined: May 2007
Posts: 265
Likes: 1
From: fl
Default

Thanks for the help... Do you think upper or lower?
Old 08-02-07 | 08:01 PM
  #4  
Kaiser's Avatar
Kaiser
Racer
iTrader: (1)
 
Joined: Nov 2004
Posts: 1,831
Likes: 0
From: Arizona
Default

Hard to say from here, but if I was wanting on set more than the other I'd want lower. They are MUCH cheaper.
Old 08-02-07 | 08:11 PM
  #5  
95gs300's Avatar
95gs300
Thread Starter
Pole Position
 
Joined: May 2007
Posts: 265
Likes: 1
From: fl
Default

Alright I'm checking it out tomorrow, thanks so much for all the help.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Marathon11
RX - 2nd Gen (2004-2009)
9
05-30-17 09:09 PM
Brokenis
IS - 3rd Gen (2014-present)
15
03-04-17 09:13 PM
gmontague
IS - 3rd Gen (2014-present)
4
02-02-15 08:08 PM
Dylroberts
LS - 1st and 2nd Gen (1990-2000)
5
10-28-13 09:55 AM
sharpener
RX - 2nd Gen (2004-2009)
9
03-12-06 09:37 AM



Quick Reply: Help!!! clicking sound



All times are GMT -7. The time now is 03:58 AM.