Official DIY / How To
#76
Driver School Candidate
Join Date: May 2010
Location: Il
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Hm, could someone send me the link to the best place to buy the control arm and bushings?
The auto shop quoted me $400 each arm for the front, and said they were about to snap off and the bushing were completely done and messed up. So before I embark on an over $1000 repair, I'm wondering if I can buy the parts and have the shop install them.
The auto shop quoted me $400 each arm for the front, and said they were about to snap off and the bushing were completely done and messed up. So before I embark on an over $1000 repair, I'm wondering if I can buy the parts and have the shop install them.
#77
Lexus Champion
Hm, could someone send me the link to the best place to buy the control arm and bushings?
The auto shop quoted me $400 each arm for the front, and said they were about to snap off and the bushing were completely done and messed up. So before I embark on an over $1000 repair, I'm wondering if I can buy the parts and have the shop install them.
The auto shop quoted me $400 each arm for the front, and said they were about to snap off and the bushing were completely done and messed up. So before I embark on an over $1000 repair, I'm wondering if I can buy the parts and have the shop install them.
#78
Driver School Candidate
Join Date: Jul 2010
Location: HI
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Can someone help me with installing front drivers side window and regulator??
Can someone help me with installing front drivers side window and regulator?? I ordered online and dont know where to start?
I appreciate any help!!!!!!!!!!!!!!!!!!!!!!
I appreciate any help!!!!!!!!!!!!!!!!!!!!!!
#79
Installation is the reverse. Shouldn't take more then 45 minutes really.
#80
#81
Driver School Candidate
Join Date: Aug 2010
Location: california
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
thanks for all ur post ,,,,i just did all on this page ,,,,looki spiffy,just need a jdm front end ,,,,n e hook ups in so-cal ??????????????????$$$$$$$$$$$$$$$$$$
#82
Driver School Candidate
Join Date: Dec 2010
Location: CA
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
Hi every one, sorry if I'm posting in the wrong thread, just joined today and this is my first posting. I recently bought a 94 GS300 and now is leaking water from the back of the engine. There is no water in the oil or shaking of the car. Any ideas where the water is leaking through? I can't physically see it. Thanks in advance.
#83
Pole Position
iTrader: (4)
Join Date: Sep 2006
Location: So Cal SGV
Posts: 338
Likes: 0
Received 0 Likes
on
0 Posts
here's another helpful one that should be posted for usdm to jdm headlights
https://www.clublexus.com/forums/gs-...-question.html
https://www.clublexus.com/forums/gs-...-question.html
#88
Pole Position
Join Date: Jan 2008
Location: Michigan
Posts: 328
Likes: 0
Received 0 Likes
on
0 Posts
Can someone please add a trans removal d.i.y.! I know someone has done this before. My main concern is making sure I disconnect all the right wires so I don't deploy the airbags and do more unnecessary damage and where the wires are located!