Help needed... Picture of ISC connector.
09-24-09, 04:14 PM
#1
Driver
Thread Starter
iTrader: (2)
Join Date: Jul 2008
Location: Florida
Posts: 194
Likes: 0
Received 0 Likes
on
0 Posts
Help needed... Picture of ISC connector.
Could anyone get me a picture of the underside of the ISC/IAC vavle's connector? There is no connector on my car, and the pins are directly connected to the valve....well, they were.... And, I am having trouble understanding the pinout in the FSM, seeing it on the car would help me greatly!!!
Any help really, really appreciated!!
-Bryan
Any help really, really appreciated!!
-Bryan
10-07-09, 04:11 PM
#2
Driver
Thread Starter
iTrader: (2)
Join Date: Jul 2008
Location: Florida
Posts: 194
Likes: 0
Received 0 Likes
on
0 Posts
Bump, anybody??? Car is still down b/c of this. Or, if anyone has a ISC connector with the pigtails they can sell, I am very interested. IT HAS TO BE FROM A 1G GS300. The wiring is different colors from different cars, I found out the hard way.
10-14-09, 04:28 PM
#6
Driver
Thread Starter
iTrader: (2)
Join Date: Jul 2008
Location: Florida
Posts: 194
Likes: 0
Received 0 Likes
on
0 Posts
Hey I replied to your reply in my WTB ad, but wanted to say something here too. In light of your current situation with your car, thanks for wanting to try to help me out. I was starting to give up on this community, you can only do so much by yourself.
10-14-09, 04:36 PM
#7
To be honest, its sometimes hard to get technical advice in the 1GS forum simply because there aren't many of us left. Its a good community here, just give it a little time 
Now i checked outside just now at the plug. Do you need that black IAC unit, or the plug that plugs into it? Do you need the whole harness or just that plug?
Now i checked outside just now at the plug. Do you need that black IAC unit, or the plug that plugs into it? Do you need the whole harness or just that plug?
Trending Topics
10-14-09, 05:26 PM
#8
Driver
Thread Starter
iTrader: (2)
Join Date: Jul 2008
Location: Florida
Posts: 194
Likes: 0
Received 0 Likes
on
0 Posts
I guess I didn't really think that there weren't many 1G's around still. I come from the MKIII Supra community and they have a much bigger following. That and the fact that MKIII guys are always working on their cars. 
As far as the picture goes, the underside of the plug, or side shots showing the wiring going into the connector. Basically a picture showing what color wire goes where in the plug. This will be useful in the future, as the Supra IAC plug will be then usable.
As far as the picture goes, the underside of the plug, or side shots showing the wiring going into the connector. Basically a picture showing what color wire goes where in the plug. This will be useful in the future, as the Supra IAC plug will be then usable.
Thread
Thread Starter
Forum
Replies
Last Post
