When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
their lenses aren't as "clean" as you think.. u trim your headlight's flat spot off and leave a little edging.. THEN you glue the new one over it so theres a little trim around the whole
thing on the edge.. its the only path available right now but its not as clean as you think..
Take all the time you need. If it was possible to get glass molds instead of plastic, I'd be doublely down. Either way I'm gonna do something about my headlights eventually.
Those are Euro-spec lenses. The euro lenses are 100% different than USDM and JDM lenses. EDM are 2-piece with the main housing being glass with a plastic corner lens while the JDM and USDM sets are one-piece units with plastic cover with a UV-resistant clear coat.
Those are Euro-spec lenses. The euro lenses are 100% different than USDM and JDM lenses. EDM are 2-piece with the main housing being glass with a plastic corner lens while the JDM and USDM sets are one-piece units with plastic cover with a UV-resistant clear coat.
yup imported from the UK and made with glass so no chance of it turning yellow/fogging up and fits the same as usdm/jdm gs's
I sanded my lenses clear,(well 3/4 clear) and retrofitted Acura TSX projectors into them. Seemed to have turned out pretty decent, only thing I would change, would be the clear coat polish i used. I want to bake them apart and get them sprayed clear at a body shop for added "clearness"