20" on first gen rims offset questions
#1
Driver School Candidate
Thread Starter
iTrader: (5)
Join Date: Jul 2009
Location: CA
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
20" on first gen rims offset questions
i am ordering new rims and need some help. here are the specs : 20x8.5 +32 (front) and 20x10.5 +30 (back) : do the rims fit my first gen gs300? will i have to roll fenders? and if yes how many inch? planning to lower it, very low. i need help guys
#6
Driver School Candidate
Thread Starter
iTrader: (5)
Join Date: Jul 2009
Location: CA
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
so it should clear right? .. just a little role.. friend told me 10.5 is too wide with a 30 offset.. i think he is wrong or is he? i am trying to get the rims asap if it clears
#7
what with of tires are you going with? and what width tires did the silver car go with?
are you talking the rims are 10.5 inches wide, from outside of lip to outside of the rim? or are you talking bead to bead width?
if you set the rims down on the ground, and measure from the ground to the top of the rim (which would be outside of the lip) how tall are they? (ie, wide)
cause people measure rims differently, like the ****er i bought my rims off of
are you talking the rims are 10.5 inches wide, from outside of lip to outside of the rim? or are you talking bead to bead width?
if you set the rims down on the ground, and measure from the ground to the top of the rim (which would be outside of the lip) how tall are they? (ie, wide)
cause people measure rims differently, like the ****er i bought my rims off of
Trending Topics
#12
kidsz wow thoose rims look nice on the gs300. there is one just like yours with the same rims in my hood. loving that look, especially with the fat lip. are thoose the xxr 502?