Best body kit besides Junction Produce and Wald?? And Other stuff??
#1
Pole Position
Thread Starter
Join Date: Jul 2010
Location: Amarillo, Texas
Posts: 340
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
I'm trying to plan ahead on my project since I don't wanna constantly change my mind about what to change on my JZ147. Same thing applies with the performance like the catback exhaust, turbo, headers, etc. So any tips, anyone??
#4
Racer
iTrader: (15)
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
+1 for the Vlene kit. I think this is the best and cleanest kit for this car. The Aimgain one is not bad either.
Personally I think it would be pretty easy to get a front bumper designed for the 2GS and cut it from the trim line and mould it to the 1st gen. The flow of both cars are very close.
Personally I think it would be pretty easy to get a front bumper designed for the 2GS and cut it from the trim line and mould it to the 1st gen. The flow of both cars are very close.
#5
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
http://www.freewebs.com/aristosix/bo...suspension.htm
that site shows some of kits for our 1gs. vlene kit? never heard of it. any links to where I can see a pic of it?
that site shows some of kits for our 1gs. vlene kit? never heard of it. any links to where I can see a pic of it?
#6
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
http://www.l-tunedparts.com/model/st...d=23&cat_id=12
http://www.autonetperformance.com/Au...lljzs147-2.jpg front lip on aristo bumper
http://www.autonetperformance.com/Au...lljzs147-2.jpg front lip on aristo bumper
#7
Racer
iTrader: (15)
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
http://www.l-tunedparts.com/model/st...d=23&cat_id=12
http://www.autonetperformance.com/Au...lljzs147-2.jpg front lip on aristo bumper
http://www.autonetperformance.com/Au...lljzs147-2.jpg front lip on aristo bumper
Vlene
Aimgain
Job Design
But personally I would take a 2GS either Mode Parfume or K-Break front bumper and chop off the bottom half and mould it on
![](http://www.blowdesign.co.jp/exterior/images/msp/01/04.jpg)
![](http://www.k-break.com/complete/16arist/frontbumper.jpg)
Last edited by Sonic_RC; 07-22-10 at 08:39 PM.
Trending Topics
#11
#12
Pole Position
Thread Starter
Join Date: Jul 2010
Location: Amarillo, Texas
Posts: 340
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
its just the fact that i try to narrow down my search but get frustrated so I decide to ask questions and knowing how much the forums on here really help. had anyone ever consider orders kits from andy's autosport?
#13
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
All the stuff from andys autosport is cheap knockoff stuff. Look for an authorized distributor. Check the vendor ads. Try l-tuned or memoryfab.com.
the Job design kit is a small kit (not at low to the ground) in general compared to any other kit out there and even smaller then aimgain/vlene even though they are somewhat similar. But IMO, If I was buying a kit, Id chose Vlene, aimgain, then job design or the Kazz type II
the Job design kit is a small kit (not at low to the ground) in general compared to any other kit out there and even smaller then aimgain/vlene even though they are somewhat similar. But IMO, If I was buying a kit, Id chose Vlene, aimgain, then job design or the Kazz type II