TRD SUPRA MOUNTS and bracket fitment issues.
#1
Rookie
Thread Starter
Join Date: Jun 2008
Location: ny
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
i have a 93 gs300 with a gte swap. i ordered trd supra motor mounts bc im expecting big power gains and also ive read that they fit and lower the motor about .25 inches. but when i tried to install them it seems as thought they are too big and will actually raise the motor about 2 inches. im just curious, does anyone know what mounting BRACKETS i can use so i can install my motor without raising or loweing it too much. any help would be greatly appreciated.
#2
Instructor
iTrader: (1)
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Good question...
I have an SC300, and I've been thinking the SAME exact thing.
I'd like to lower my engines center of gravity a bit, for the sake of handling (inspired by Subaru Boxer Engine) while harnessing some lost power, by limiting its movement (in other words, getting it to the ground).
I have an SC300, and I've been thinking the SAME exact thing.
I'd like to lower my engines center of gravity a bit, for the sake of handling (inspired by Subaru Boxer Engine) while harnessing some lost power, by limiting its movement (in other words, getting it to the ground).
#3
Lexus Champion
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
i have a 93 gs300 with a gte swap. i ordered trd supra motor mounts bc im expecting big power gains and also ive read that they fit and lower the motor about .25 inches. but when i tried to install them it seems as thought they are too big and will actually raise the motor about 2 inches. im just curious, does anyone know what mounting BRACKETS i can use so i can install my motor without raising or loweing it too much. any help would be greatly appreciated.
Thread
Thread Starter
Forum
Replies
Last Post