1993 gs300 throttle body stuck to Y
10-07-12, 12:34 PM
#1
Driver School Candidate
Thread Starter
Join Date: Dec 2004
Location: Georgia
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
1993 gs300 throttle body stuck to Y
Am attempting spark plug/wire job.
Everything that should be disconnected and/or removed is done. So how do I break loose or pry throttle body from the Y air intake to manifold. It does not want to budge so I fugured I'd try the forum before breaking/cracking something by prying or pounding. What area on throttle body can I pry or pound? Accelerator wire disconnecting was real problem btw. This is not an easy job!
Everything that should be disconnected and/or removed is done. So how do I break loose or pry throttle body from the Y air intake to manifold. It does not want to budge so I fugured I'd try the forum before breaking/cracking something by prying or pounding. What area on throttle body can I pry or pound? Accelerator wire disconnecting was real problem btw. This is not an easy job!
Thread
Thread Starter
Forum
Replies
Last Post
