aleksey

Attachment 287428 all switch off ingine switch on, when i drive all ok and work (speedometr,tahometr,temp.,fuel) and somebody make say me when stop engine arrow go down (on 0 ) or not

OGS300

whats the problem?

aleksey

when all power off spedometr show 90km/h and tahometr show 2000r/min(2 image), after when start engine all needle go on 0, and when i drive all ok i mean if i drive 20km/h spedometr show 20km/h and I can't understand when the ignition is off where to put the arrow in zeros or not?

TheMole

iTrader: (13)

Strange that the needles would be in that position when the car is completely off.

aleksey

needles should stand the zeros or not?

OGS300

hmmmmm that is weird have you tried to isolate the cluster and test with another one that works fine?

Titten

I have a related problem. My gas and speedo needle read too low, and the temp needle shows high, even when the car is dead cold. I now the previous owner was messing with the dash needles. there's a chance he put them back on wrong.

Nixspeed

The GS needles only go on 1 way so shouldn't be on wrong. Most likely a gauge issue. Contact lextreme.org and ask them. The repair all Lexus gauges.

aleksey

yesterday ordered from e bay another dashboard with English lexus will wait until you make and try and change as for the repair asked 250$

Titten

Thx Nix, I'll do that.