Biggest Rims a GS Can Fit?
Minezz izzz beee-gah!!! LOL
02-27-04 | 09:48 PM
#33
Lead Lap
Joined: Jul 2002
Posts: 730
Likes: 1
From: MICHIGAN
HRE doesn't make a 21" wheel
HRE will make any design in any size for the dough. If you want a 21in. HRE they wheel manufacture it. It probaly would cost alot but they would still make it. Trust me asked them already.
HRE will make any design in any size for the dough. If you want a 21in. HRE they wheel manufacture it. It probaly would cost alot but they would still make it. Trust me asked them already.
02-28-04 | 02:13 AM
#34
Lead Lap
Joined: Jul 2002
Posts: 609
Likes: 0
From: Texas
Originally posted by APLUS
HRE doesn't make a 21" wheel
HRE will make any design in any size for the dough. If you want a 21in. HRE they wheel manufacture it. It probaly would cost alot but they would still make it. Trust me asked them already.
HRE doesn't make a 21" wheel
HRE will make any design in any size for the dough. If you want a 21in. HRE they wheel manufacture it. It probaly would cost alot but they would still make it. Trust me asked them already.
03-01-04 | 02:11 AM
#35
Originally posted by Lonely Toothbrush
When u fit 11.5" in the rear, what offset do u run? Cuz I'm planning to fit 20x10 +24 in the rear with 275-30-20 on GS430. I also want to lower the car for about 3 inches to tuck the tires into the wheelwells.
When u fit 11.5" in the rear, what offset do u run? Cuz I'm planning to fit 20x10 +24 in the rear with 275-30-20 on GS430. I also want to lower the car for about 3 inches to tuck the tires into the wheelwells.
03-01-04 | 02:13 AM
#36
Originally posted by APLUS
HRE doesn't make a 21" wheel
HRE will make any design in any size for the dough. If you want a 21in. HRE they wheel manufacture it. It probaly would cost alot but they would still make it. Trust me asked them already.
HRE doesn't make a 21" wheel
HRE will make any design in any size for the dough. If you want a 21in. HRE they wheel manufacture it. It probaly would cost alot but they would still make it. Trust me asked them already.
bottom line, hre does NOT have anything over 20s for 840r and 540r. if you can get them to make a set of 640R in 21s then you can try
03-01-04 | 02:15 AM
#37
Originally posted by 1SICKLEX
The fact of the matter is this; 20s are the largest wheel that should be fit on a GS. You want 21s or 22s, buy a 745, where is looks somewhat appropriate. You want to get in the World Guiness Book of World Records for largest wheels on a GS, fine. But you will also win lowest I.Q in the Northern Hemisphere.
The 2nd gen GS is 5 inches shorter than the 1st gen. If bigger is better, you bought the wrong car.
This is CLUBLEXUS LAW. No bigger than 20s on a GS. Any questions???????
The fact of the matter is this; 20s are the largest wheel that should be fit on a GS. You want 21s or 22s, buy a 745, where is looks somewhat appropriate. You want to get in the World Guiness Book of World Records for largest wheels on a GS, fine. But you will also win lowest I.Q in the Northern Hemisphere.
The 2nd gen GS is 5 inches shorter than the 1st gen. If bigger is better, you bought the wrong car.
This is CLUBLEXUS LAW. No bigger than 20s on a GS. Any questions???????
03-04-11 | 02:51 AM
#40
Driver
Joined: May 2006
Posts: 157
Likes: 1
From: Russia
11" rims ... offset?
If I ever get rid of my current rims with the rears currently being 19 x 10 & 285/30-19 tires, I will go for 19 x 11 with 305/25 - 19 tires.
My current rims have a 45 offset and with the clearance I get using coilovers, I measured the inside lip to the spring and have over an inch of clearance. So a 19x11 rim should fit. I could also move the offset out toward the fender with a bit more shaving of the lip. I am almost certain I can get this to fit without rubbing at "any" ride height.
For those thinking the 305/25 tire profile is too low, it is almost the exact same profile as a 255/30 that I have on my wife's IS. I am interested in gaining more off the line traction, so unless I want to use drag radials on 17 inch rims, the 305/25 sounds like the best option for me.
If I ever seriously consider doing this, I will definitely post the results and the offset I chose. It's only saving up for HRE 841R's that is holding me up !
My current rims have a 45 offset and with the clearance I get using coilovers, I measured the inside lip to the spring and have over an inch of clearance. So a 19x11 rim should fit. I could also move the offset out toward the fender with a bit more shaving of the lip. I am almost certain I can get this to fit without rubbing at "any" ride height.
For those thinking the 305/25 tire profile is too low, it is almost the exact same profile as a 255/30 that I have on my wife's IS. I am interested in gaining more off the line traction, so unless I want to use drag radials on 17 inch rims, the 305/25 sounds like the best option for me.
If I ever seriously consider doing this, I will definitely post the results and the offset I chose. It's only saving up for HRE 841R's that is holding me up !
I try to make order for 18x11" rear rims for my 315's babes
I found you old post about wheel fitment.
Could you say exactly clearances:
- between fender and wheel,
- between wheel and spring (you said over 1"?)
with your current rear wheels (i think 19x10 +45)?
What offset i need for 11's fit without fender mods? may be just shaving...
Thanks in advance!
