Replacing the PNR bulb #74 on my GS400
03-08-05, 01:47 PM
#1
Lead Lap
Thread Starter
Replacing the PNR bulb #74 on my GS400
My PNR bulb burnt out so I decided to replace it today.
Just want to share replacing my PNR bulb (I used a #74 bulb) and removing the center console.
1. Remove ashtray and unplug harness.
2. Pull center console straight up and back. Hold where the wood meets the armrest. basically where the the VSC and the Power buttons are located.
3. Unplug the wireharness. Put car in lowest gear so that it is easier to slip off center console.
4 Take the PNR cover off.
5 Locate and remove and replace bulb #74. (remember to keep the green bulb cover and place it on new bulb.)
6. Now just repaet steps backwards to finish job.
Here are some pics:
Just want to share replacing my PNR bulb (I used a #74 bulb) and removing the center console.
1. Remove ashtray and unplug harness.
2. Pull center console straight up and back. Hold where the wood meets the armrest. basically where the the VSC and the Power buttons are located.
3. Unplug the wireharness. Put car in lowest gear so that it is easier to slip off center console.
4 Take the PNR cover off.
5 Locate and remove and replace bulb #74. (remember to keep the green bulb cover and place it on new bulb.)
6. Now just repaet steps backwards to finish job.
Here are some pics:
Last edited by edfrsd; 03-08-05 at 01:56 PM.
The following users liked this post:
Fb45 (03-05-23)
03-08-05, 01:49 PM
#3
Lead Lap
Thread Starter
1. Remove ashtray and unplug harness. Put car in lowest gear so that it is
easier to slip off center console.
easier to slip off center console.
Last edited by edfrsd; 12-11-07 at 05:59 PM.
03-08-05, 01:50 PM
#4
Lead Lap
Thread Starter
2. Pull center console straight up. hold where the wood meets the armrest. basically where the the VSC and the Power buttons are located.
Last edited by edfrsd; 12-11-07 at 05:58 PM.
03-08-05, 01:52 PM
#7
Lead Lap
Thread Starter
5 Locate and remove and replace bulb #74. (remember to keep the green bulb
cover and place it on new bulb.)
cover and place it on new bulb.)
Last edited by edfrsd; 12-11-07 at 05:55 PM.
Trending Topics
03-08-05, 01:53 PM
#9
Lead Lap
Thread Starter
Here are some additional pics.
PS. I will not be responsible for any damage to your vehicle. This is only
to be used as an instructional guide and to be used to your disgretion..
-ed
PS. I will not be responsible for any damage to your vehicle. This is only
to be used as an instructional guide and to be used to your disgretion..
-ed
Last edited by edfrsd; 12-11-07 at 05:53 PM.
The following users liked this post:
Tank (03-17-21)
03-08-05, 02:13 PM
#10
Forum Administrator
iTrader: (2)
nice writeup Ed, thanks for sharing!
03-08-05, 04:27 PM
#15
Lead Lap
Thread Starter
Ive never actually had that light working so I just wanted to see how easy it was to replace. I will change them with the #74 LED as soon as I can buy one.