19" Work Equip
04-24-05, 07:11 PM
#16
Originally Posted by D2-AUTOSPORT
Lenny, those specs are okay, but PLEASE do not run those tires, they are way too small. Those are IS300 sized tires so in all seriousness the wheels will look like rollerskates on a GS if you run those!
Good luck otherwise
Good luck otherwise
Like I told him, these are not optimal but they are not bad. Since they are x8 and x9, a 235/265 combo is probably ideal or even 245/275 (although this will be pushing a little, it's doable). He can probably use these until he can swap them out.
Still, although they will work, the ride quality will be pretty crappy, the handling not optimal, body clearance will be low (good and bad depending on how you look at it), and fender gap will be high.
04-24-05, 11:21 PM
#17
Pole Position
Thread Starter
Join Date: Feb 2002
Posts: 285
Likes: 0
Received 0 Likes
on
0 Posts
Thanks guys for all your input.
They were less than 1400 shipped from japan.
Gues the downer is the tire size and some curb rash. Nothing some polishing cant take care of =)
They were less than 1400 shipped from japan.
Gues the downer is the tire size and some curb rash. Nothing some polishing cant take care of =)
Thread
Thread Starter
Forum
Replies
Last Post
