EXHAUST OR TIPS? You be the judge...
07-15-01, 07:27 PM
#4
Lexus Fanatic
iTrader: (20)
Could be GReddy, Blitz, or a custom job, like, as you said, just tips. If it's just tips it's nice, but you don't get any new sound of course.
07-15-01, 08:56 PM
#5
Lexus Champion
My guess are those are only round angle cut tips.. BTW they look nice.. A bit too big for my taste but I still like them none-the-less..
Last edited by 2SAVVY; 07-16-01 at 08:07 AM.
07-16-01, 08:46 AM
#7
Driver
Thread Starter
Join Date: Jun 2001
Location: California
Posts: 115
Likes: 0
Received 0 Likes
on
0 Posts
TIPS THEY ARE
I knew someone technically savvy would enhance to see the cans. You are both correct that they are, after all, Tips.
I post this because I am one of those ClubLexus members who is after the look but not the sound increase over stock exhaust. I have read numerous threads about members looking for a good upgrade/mod that doesn't increase noise - this may be the mod you are looking for to fill out that big opening and dump the pencil tips.
I have talked with the manufacturer and I can get these in straight cut, angle cut, 3", 3.5" 4" and 4.5" (shown is 4.5', angle cut). I am working to getting a group buy price, without the group buy minimum for those who are interested.
If you are, PM me so I can let the manufacturer know a rough count.
These are 304 Stainless Steel with a rolled tip and high polish. Should be about $100 for 2 tips delivered, but am working on that.
I have another set coming that are 4" and will take pictures of those once I get them. The 4.5" require welding, the 4's may not based on inlet diameter availability.
I post this because I am one of those ClubLexus members who is after the look but not the sound increase over stock exhaust. I have read numerous threads about members looking for a good upgrade/mod that doesn't increase noise - this may be the mod you are looking for to fill out that big opening and dump the pencil tips.
I have talked with the manufacturer and I can get these in straight cut, angle cut, 3", 3.5" 4" and 4.5" (shown is 4.5', angle cut). I am working to getting a group buy price, without the group buy minimum for those who are interested.
If you are, PM me so I can let the manufacturer know a rough count.
These are 304 Stainless Steel with a rolled tip and high polish. Should be about $100 for 2 tips delivered, but am working on that.
I have another set coming that are 4" and will take pictures of those once I get them. The 4.5" require welding, the 4's may not based on inlet diameter availability.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post