View Poll Results: ** JP Style Tails, does the bulb out light bother you?? **
I wont purchase them
26
49.06%
Who cares
27
50.94%
Voters: 53. You may not vote on this poll
** JP Style Tails, does the bulb out light bother you?? **
#1
Thread Starter
Original CL Sponsor since 1999
Joined: Feb 2001
Posts: 1,684
Likes: 2
From: California
** JP Style Tails, does the bulb out light bother you?? **
Well, seems like a slight glitch with the JP Style LED tail lights. When installed you will have a bulb out light on your dash.
#5
Thats interesting, theres always a catch with some aftermarket stuff, But some guys have CEL lights with the LSD's so I guess most could live with I think, just put blk tape on the dash. Wait what if a real bulb burns out?
#6
it's definitely annoying, and i would find ways (beside a black tape) to fix the problem. that's why we all buy the new ecu for our sc430 right, steve?
i talked to rmmgs4 yesterday and he said you can just pull the dash and take out that bulb. i think that would be an easy method (not like sc430, all leds)
steve, are you having something else in your mind?
i talked to rmmgs4 yesterday and he said you can just pull the dash and take out that bulb. i think that would be an easy method (not like sc430, all leds)
steve, are you having something else in your mind?
Trending Topics
#8
Why not measure the resistance on the stock assembly, then measure the resistance on the aftermarkey assembly and install the appropriate inline resisters to keep the computer happy? This is what I did to eliminate the 3rd brake light on my car.
-Nick
-Nick
#9
Originally Posted by beaterKU
Why not measure the resistance on the stock assembly, then measure the resistance on the aftermarkey assembly and install the appropriate inline resisters to keep the computer happy? This is what I did to eliminate the 3rd brake light on my car.
-Nick
-Nick
#10
Northern California Regional Officer
iTrader: (5)
Joined: May 2001
Posts: 8,702
Likes: 5
From: California
Originally Posted by beaterKU
Why not measure the resistance on the stock assembly, then measure the resistance on the aftermarkey assembly and install the appropriate inline resisters to keep the computer happy? This is what I did to eliminate the 3rd brake light on my car.
-Nick
-Nick
Using the resistors not only tricks the indicator from turning on, if your bulbs really do go out , the warning still won't flash.
What's the use, just take out the bulb and be done with it.
#11
Northern California Regional Officer
iTrader: (5)
Joined: May 2001
Posts: 8,702
Likes: 5
From: California
Originally Posted by dino
Its not like I won't buy the lights, but I think ill be annoyed, espically from passengers who will keep asking what that light is. The lights look too good to not buy it just b/c of that.
I guess Steve should have made this clear at the start of this new post. I spent over an hour on the other thread covering all these questions and answering them. This new thread makes me feel like we're starting all over again with the questions.
There is a fix for this.
Not your fault, but please refer to the other thread and my write up.
#13
Northern California Regional Officer
iTrader: (5)
Joined: May 2001
Posts: 8,702
Likes: 5
From: California
.EVERYONE
Please read my review. I spent over an hour writing it up.
https://www.clublexus.com/forums/sho...4&page=5&pp=15
Please spend a few minutes to skim through it.
Problems solved .
The answers are there. .
Please read my review. I spent over an hour writing it up.
https://www.clublexus.com/forums/sho...4&page=5&pp=15
Please spend a few minutes to skim through it.
Problems solved .
The answers are there. .