Gotta Love The Man In The Brown!!!! pics ->
06-08-06, 11:06 AM
#1
Pole Position
Thread Starter
Join Date: Dec 2005
Location: CA
Posts: 351
Likes: 0
Received 0 Likes
on
0 Posts
Gotta Love The Man In The Brown!!!! pics ->
haha yea i know thir not on the car yet, but i just got em in and im happy, so i wanted to share:
ordered it this past weekend, and it arrived today. pretty much running the same set-up as AZDESERTGS, with 14235 mufflers, and 7" magnaflow tips, although I will be taking out my resonators (still debating that). This all came out to under $240 (thanks to GSoup's coupon recommendation), and with install and custom piping im not looking at more than $400 for the entire project.
Once I get it up and running I will post a vid. Just praying it sounds nice.
ordered it this past weekend, and it arrived today. pretty much running the same set-up as AZDESERTGS, with 14235 mufflers, and 7" magnaflow tips, although I will be taking out my resonators (still debating that). This all came out to under $240 (thanks to GSoup's coupon recommendation), and with install and custom piping im not looking at more than $400 for the entire project.
Once I get it up and running I will post a vid. Just praying it sounds nice.
06-08-06, 11:33 AM
#2
Here we go again.. aren’t you suppose to be at work... well I know for a fact that you are...
Get back to work or else I wont call my exhaust guy and make an appointment for you
Damn newbies they can never wait... and stop trying to wake me up on my day off, lol
Get back to work or else I wont call my exhaust guy and make an appointment for you
Damn newbies they can never wait... and stop trying to wake me up on my day off, lol
Damn you may have to cut the bumper so they fit... Good Luck and waiting for the Vid.. 
06-08-06, 01:05 PM
#7
Lexus Champion
Originally Posted by svt5150
He probably means 7" in length. A 7" diameter tip would look horrible.
Trending Topics
06-08-06, 01:40 PM
#10
Congrats on the purchase. You will love the sound. The model you purchased is part of the "street series mufflers" for Magnaflow. The only difference between the 14829 and the one you purchased is the offset of the inlet. Welcome to the Magnaflow family. Mario Andretti will be writing you soon 
06-08-06, 04:22 PM
#12
Lexus Test Driver
iTrader: (4)
Join Date: Dec 2005
Location: Phoenix, AZ
Posts: 1,508
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by oohpapi44
Just curious, what made you decide to not go with the 14829 which seems to be the most popular choice for the GS?
As for the difference between the 14829 and this set-up (since I have had both) is that it is easier to have the exhaust come straight out the back of the valence. When you have the center/center offset of the 14829's it doesn't leave to much room for the exhaust guy and makes a pretty aggressive angle to make it come out straight. Thats why most will have a slight angle of the 14829 after they are installed. These are still a straight through design and imo looks better from the rear after they are installed then my old set-up. Only thing is that they don't sell the offset/offset muffler with the tips already installed....boooooooo
06-08-06, 07:07 PM
#14
Pole Position
Thread Starter
Join Date: Dec 2005
Location: CA
Posts: 351
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by AZDesertGS
You'll love the set-up.....I do As for the difference between the 14829 and this set-up (since I have had both) is that it is easier to have the exhaust come straight out the back of the valence. When you have the center/center offset of the 14829's it doesn't leave to much room for the exhaust guy and makes a pretty aggressive angle to make it come out straight. Thats why most will have a slight angle of the 14829 after they are installed.
These are still a straight through design and imo looks better from the rear after they are installed then my old set-up. Only thing is that they don't sell the offset/offset muffler with the tips already installed....boooooooo
As for the difference between the 14829 and this set-up (since I have had both) is that it is easier to have the exhaust come straight out the back of the valence. When you have the center/center offset of the 14829's it doesn't leave to much room for the exhaust guy and makes a pretty aggressive angle to make it come out straight. Thats why most will have a slight angle of the 14829 after they are installed. These are still a straight through design and imo looks better from the rear after they are installed then my old set-up. Only thing is that they don't sell the offset/offset muffler with the tips already installed....boooooooo
AZ went on to mention how the 14235 looked better, but that they didnt get tips with them. So i knew my exhaust guy could weld tips no problem, and i figured what spending a lil more having him weld the tips as opposed to it looking bi-directional ( i absolutely hate it when exhausts look like this).
thanks again to AZ and Gsoup. AZ i've got your car as my wallpaper at the office. GSoup thanks for saving me a lil cash, cant wait to see what you do with your new ride
06-09-06, 10:13 AM
#15
Lexus Test Driver
iTrader: (4)
Join Date: Dec 2005
Location: Phoenix, AZ
Posts: 1,508
Likes: 0
Received 0 Likes
on
0 Posts
Let us know what you think and post some pics after its all done. I've been thinking about taking off the magnaflow resonators I got so i'd be curious what you think if you go that route of removing them. Can't wait to see the results