The begininng of my GS300 project!
#211
Lead Lap
Thread Starter
Join Date: Oct 2005
Location: Florida
Posts: 545
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
I know I know, just about got all the parts I need, polished, powder coated, etc. The motor should be back together before the weekend and then it might just go back into the car.
And yes, I have spent a lot of money on this car, was going stock for a while with minor upgrades, but then it seems that nothing ever ends that way. Just yesterday, I spent almost $500 on hoses from Aeroquip. We decided to NOT use your normal stainless steel hoses, instead we are going with Starlite Racing Hoses. These hoses are half the weight (not that it matters) of stainless steel hoses and are made from Kevlar and Nomex.
Instead of going with the good ole stainless lines, with your blue and red AN fittings, we selected to not only use the Starlite hoses, but we are also using the nickle and black anodized AN fittings to make this engine bay stand out from the rest. You can get an idea what the Starlite lines look like from the picture below.
And yes, I have spent a lot of money on this car, was going stock for a while with minor upgrades, but then it seems that nothing ever ends that way. Just yesterday, I spent almost $500 on hoses from Aeroquip. We decided to NOT use your normal stainless steel hoses, instead we are going with Starlite Racing Hoses. These hoses are half the weight (not that it matters) of stainless steel hoses and are made from Kevlar and Nomex.
Instead of going with the good ole stainless lines, with your blue and red AN fittings, we selected to not only use the Starlite hoses, but we are also using the nickle and black anodized AN fittings to make this engine bay stand out from the rest. You can get an idea what the Starlite lines look like from the picture below.
#212
Lead Lap
Thread Starter
Join Date: Oct 2005
Location: Florida
Posts: 545
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
As you can see from the picture, the line's appearance are much like the stainless steel braided lines, but in black and has a streaks of red running through them.
Not only are the lines a better alternative compared to the stainless lines, but it also matches the whole color variation I am trying to stick with.
Not only are the lines a better alternative compared to the stainless lines, but it also matches the whole color variation I am trying to stick with.
#213
Lead Lap
Thread Starter
Join Date: Oct 2005
Location: Florida
Posts: 545
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Here's an idea on what the fittings will look like.
Here's the very popular blue and red AN fittings -
![](http://www.aeroquip.com/media/FCM4032.jpg)
Here's the nickle plated ones that we will be using -
![](http://www.aeroquip.com/media/FCE4032.jpg)
Here's an idea of what the black fittings that will also be used looks like-
Here's the very popular blue and red AN fittings -
![](http://www.aeroquip.com/media/FCM4032.jpg)
Here's the nickle plated ones that we will be using -
![](http://www.aeroquip.com/media/FCE4032.jpg)
Here's an idea of what the black fittings that will also be used looks like-
![](http://www.xrp.com/970009-SideL.jpg)