The begininng of my GS300 project!
#348
Lexus Champion
If you drive the car daily. I wouldn't suggest placing it there. This is a race car so It won't see any rain. Plus we want to hide as much as we can. FYI, we had many issues with the twin HKS. The manifold seem to crack all the time. I had to take them out a couple of times. It takes 5 hr to replace the turbo. No fun there. Ditch the twin and go with the GT47-88 . You will get the WOW factor when the hood is pop
JPI
JPI
#349
Lead Lap
Thread Starter
Join Date: Oct 2005
Location: Florida
Posts: 545
Likes: 0
Received 0 Likes
on
0 Posts
Here's the custom overflow tank that was fabbed up in about 2 hours. Forgive the welds, we are in a HURRRRRRY!
Need an English wheel - but it's OK!
Cirlce = cap
Here's it is 'in' the car -
Need an English wheel - but it's OK!
Cirlce = cap
Here's it is 'in' the car -
#350
Lead Lap
Thread Starter
Join Date: Oct 2005
Location: Florida
Posts: 545
Likes: 0
Received 0 Likes
on
0 Posts
The overflow tank of coure will be polished and done to make perrrty. We are trying very hard to get the car completed for HIN Orlando. I hate CRUNCH time, but it always seems to happen this way, not quite sure why.
#352
Lead Lap
Thread Starter
Join Date: Oct 2005
Location: Florida
Posts: 545
Likes: 0
Received 0 Likes
on
0 Posts
#360
Lead Lap
Thread Starter
Join Date: Oct 2005
Location: Florida
Posts: 545
Likes: 0
Received 0 Likes
on
0 Posts
What sucks is that we will have no time for placement of my electronics before HIN, but that will be the next stage. We are still a LONG way from having the car up and running. At this time, I will be happy for the car to make it to HIN Orlando in a semi compeleted state. We will see, everyone 's working hard and I appreciate all the help from everyone that's involved in the project!