LXotic

come on Jeff no DIY for the LX HID conversion?

VIP_GS

great write up... thanks a lot for sharing

DarKnight

iTrader: (3)

My father suggested using a blow dryer to melt the glue to pull the headlights apart. I didn't think that would work but what do you think?

GSteg

iTrader: (15)

blowdryer would only heat up one part of the headlight while other parts of the glue will still be hot unheated. putting it in the oven will be much easier. You dont want to concentrate heat on one area otherwise you can melt the housing. Oven provides even distribution of heat

oki_boy

iTrader: (6)

Very nice write-up. I prefer to use a heatgun. I can pull a headlight apart in about 10 mins and I feel its easier to control the heat so the stock adhesive doesn't get everywhere when pulling it apart.

LexGX

iTrader: (1)

that was an awesome writeup. Thanks a lot

HoracioGS4

thanks for taking the time for the write-up and taking all the pics...one of the best write-ups i've seen!

horacio

BIGMerle

iTrader: (8)

old thread.....but the link is dead