Ever wanted to do a retrofit yourself? Here's how!
#17
Thanks for all the positive comments. I was hoping you guys would like a good writeup on retrofitting the GS headlights. I'm going to post up more retrofit DIY's soon using different projectors.
Nope, just reused the original glue. Heat it up first and push all the glue back into the seams. This will create a nice watertight seal. You can add additional sealant if you want, but it's not really necessary.
Yeah, retrofitting is an art and skill. You just gotta keep doing it over and over...eventually you get better. How's are the LS430 projectors on your car? I love the wide beam output and cutoff on those
The two wires are for the Bi-xenon solenoid. Basically a motor that pulls down the shield so the low beam turns into a high beam projector. The two wires are hooked up to the high beam connector. As for the relay harness, I'll post up a DIY whenever I make another set.
dude..we have the same charger to test out the ballast/bulbs before I had that, I use to run back and forth to my car so I can see what they look like when lit up. lol.
I gotta agree with you though. First time retrofit stinks, and you only get better at it. My TSX retro was okay, but meh..not something I was happy with..Then came the LS430 projectors and the rest was history
I gotta agree with you though. First time retrofit stinks, and you only get better at it. My TSX retro was okay, but meh..not something I was happy with..Then came the LS430 projectors and the rest was history
The two wires are for the Bi-xenon solenoid. Basically a motor that pulls down the shield so the low beam turns into a high beam projector. The two wires are hooked up to the high beam connector. As for the relay harness, I'll post up a DIY whenever I make another set.
#23
Lexus Champion
iTrader: (2)
Join Date: Mar 2005
Location: Maryland
Posts: 1,869
Likes: 0
Received 0 Likes
on
0 Posts
o ok gotcha.... you should check out putting HID's into the yellow housing fogs.. it looks amazing.. i only have one side done.. so i'll take a pic of them on tmrw to show the difference...
#24
Adam2562, You can delete your own post. Just hit the edit button and there's an option to delete the post.
As for the HID in fogs, yeah I did that. I went the lazy route and just put a HID kit in there. I'll eventually get around to retrofitting a HID projector in there as well. For your setup, are you retrofitting a set of RX330 projectors into the fog? Only reason I ask is because I dont think the RX projectors will fit. They're pretty tall and they probably wont fit unless you make bulges in the fog housing. I believe they're 2.5" lenses.
Instead, I would recommend the 350Z pre-06 projectors because They're the smallest projectors avaiable on the market. I believe the lens is 1" on those.
As for the HID in fogs, yeah I did that. I went the lazy route and just put a HID kit in there. I'll eventually get around to retrofitting a HID projector in there as well. For your setup, are you retrofitting a set of RX330 projectors into the fog? Only reason I ask is because I dont think the RX projectors will fit. They're pretty tall and they probably wont fit unless you make bulges in the fog housing. I believe they're 2.5" lenses.
Instead, I would recommend the 350Z pre-06 projectors because They're the smallest projectors avaiable on the market. I believe the lens is 1" on those.
Last edited by JeffTsai; 11-21-06 at 10:47 PM.