Billet Rear member reinforcement bars **interest thread**
04-26-07, 11:48 PM
#31
Pole Position
Join Date: Jun 2001
Location: SAN JOSE CA
Posts: 354
Likes: 0
Received 0 Likes
on
0 Posts
No....
This is meant for the people who want something a tad different.
I wish there was another spot for these, but to be honest like i said before there is a debate on SOLID VS HOLLOW and WELDED.
Not sure you would even feel much of a diff to ditch the 2 parts of the toms at all but for the people not wanting to spend 300-400 on toms this is a great addition.
Now for those who have toms and want to try something different, im sure tons of people would be willing to hop on the just their 2 bars that we will offer.
The reason for the products being made was mostly people saying, I don't want to buy a 6pc set.
Good luck with your decision.
David
This is meant for the people who want something a tad different.
I wish there was another spot for these, but to be honest like i said before there is a debate on SOLID VS HOLLOW and WELDED.
Not sure you would even feel much of a diff to ditch the 2 parts of the toms at all but for the people not wanting to spend 300-400 on toms this is a great addition.
Now for those who have toms and want to try something different, im sure tons of people would be willing to hop on the just their 2 bars that we will offer.
The reason for the products being made was mostly people saying, I don't want to buy a 6pc set.
Good luck with your decision.
David
04-27-07, 03:07 AM
#33
Pole Position
Nice piece... Waiting for prices now..
04-27-07, 11:49 AM
#38
Lead Lap
Join Date: Apr 2006
Location: Toronto
Posts: 740
Likes: 0
Received 0 Likes
on
0 Posts
its a nice piece but are they the same as these?http://www.swiftracing.com/brakes/bracegs.htm
if so these are going for 99.95 with free shipping...also when installing are they going to go to the 2 bolts holding up the gas tank?
if so these are going for 99.95 with free shipping...also when installing are they going to go to the 2 bolts holding up the gas tank?
04-27-07, 12:04 PM
#39
Pole Position
Join Date: Jun 2001
Location: SAN JOSE CA
Posts: 354
Likes: 0
Received 0 Likes
on
0 Posts
in theory they are the same.
If you look at the machined parts on the SRT site they are open, the work on them is left open, hence the marks on the open areas. Ours without coating don't have those marks but we coated them anyways.
Now if he is using the same bar for the is3 on the GEN2 then im not sure if it will work. I think the gen2 gs bars are smaller.
his retail is 149, ours is 130, gb price should be around 99 shipped again.
If you look at the pics on the SRT site they are the same for the is300. But if you get under a gen2 GS the pad area is not the same at all. I would like to see the pics of them installed on a GEN2 GS.
Ours will work when they are done, we are about 2-3 weeks out on Shipping these..
Like i said though, the is3 and gen2gs are not the same bar, I should have tried to put the is3 bar on it yesterday but I could just see the area is different. So why not make a bar that is a direct fit based off the stock item we are improving?
D
If you look at the machined parts on the SRT site they are open, the work on them is left open, hence the marks on the open areas. Ours without coating don't have those marks but we coated them anyways.
Now if he is using the same bar for the is3 on the GEN2 then im not sure if it will work. I think the gen2 gs bars are smaller.
his retail is 149, ours is 130, gb price should be around 99 shipped again.
If you look at the pics on the SRT site they are the same for the is300. But if you get under a gen2 GS the pad area is not the same at all. I would like to see the pics of them installed on a GEN2 GS.
Ours will work when they are done, we are about 2-3 weeks out on Shipping these..
Like i said though, the is3 and gen2gs are not the same bar, I should have tried to put the is3 bar on it yesterday but I could just see the area is different. So why not make a bar that is a direct fit based off the stock item we are improving?
D
Last edited by Kreuzer; 04-27-07 at 12:10 PM. Reason: change
04-27-07, 11:10 PM
#43
Pole Position
Join Date: Jun 2001
Location: SAN JOSE CA
Posts: 354
Likes: 0
Received 0 Likes
on
0 Posts
You guys determin how many sets Carson ask's us for. As of our talks today Carson talked about 10 sets maybe, but with 10 it's not deep for a huge discount on them... Id say when posting I would put a scale of interest, 1-10
1 being small interest in getting them
10 being heck yes im getting a set.
D
1 being small interest in getting them
10 being heck yes im getting a set.
D
