pulling light out indicator bulb for LED install
06-20-07, 11:04 AM
#1
Driver
Thread Starter
Join Date: Jan 2007
Location: Missouri
Posts: 143
Likes: 0
Received 0 Likes
on
0 Posts
pulling light out indicator bulb for LED install
Hey, I got some LED tails on the way and want to know how to go about pulling the light out indicator bulb. Can somebody please post a link or tell me how to do this? I searched and came up with nothing.
Thanks,
Chris
Thanks,
Chris
06-20-07, 01:44 PM
#6
Driver
Thread Starter
Join Date: Jan 2007
Location: Missouri
Posts: 143
Likes: 0
Received 0 Likes
on
0 Posts
Thanks. I need more though. I'm not very mechanicly inclined. Is there a step by step somewhere or could you type something up real quick. I'm not sure where to even start or what/where the bulb that I'm suppost to pull is at. I'm sure other people could use it too, as the the price on these LED tails keep droping. Please.
06-20-07, 01:48 PM
#7
I just did this about an hour ago actually. I'll try to describe.
1. Put your key in and adjust the steering wheel all the way down and out
2. Pull out cluster bezel, unplug the turn signal harness.
3. There are 4 screws, one in each corner. Unscrew them and make sure they don't fall into the abyss.
4. Pull out gauge cluster and turn it upwards so you can see the bottom on it. You don't have to unplug it, there's enough space.
5. The tail light out indicator bulb is the second one on the bottom from the left. Unscrew it and it should come out.
6. Put everything back together and enjoy!
1. Put your key in and adjust the steering wheel all the way down and out
2. Pull out cluster bezel, unplug the turn signal harness.
3. There are 4 screws, one in each corner. Unscrew them and make sure they don't fall into the abyss.
4. Pull out gauge cluster and turn it upwards so you can see the bottom on it. You don't have to unplug it, there's enough space.
5. The tail light out indicator bulb is the second one on the bottom from the left. Unscrew it and it should come out.
6. Put everything back together and enjoy!
Trending Topics
06-20-07, 04:29 PM
#8
I just did this about an hour ago actually. I'll try to describe.
1. Put your key in and adjust the steering wheel all the way down and out
2. Pull out cluster bezel, unplug the turn signal harness.
3. There are 4 screws, one in each corner. Unscrew them and make sure they don't fall into the abyss.
4. Pull out gauge cluster and turn it upwards so you can see the bottom on it. You don't have to unplug it, there's enough space.
5. The tail light out indicator bulb is the second one on the bottom from the left. Unscrew it and it should come out.
6. Put everything back together and enjoy!
1. Put your key in and adjust the steering wheel all the way down and out
2. Pull out cluster bezel, unplug the turn signal harness.
3. There are 4 screws, one in each corner. Unscrew them and make sure they don't fall into the abyss.
4. Pull out gauge cluster and turn it upwards so you can see the bottom on it. You don't have to unplug it, there's enough space.
5. The tail light out indicator bulb is the second one on the bottom from the left. Unscrew it and it should come out.
6. Put everything back together and enjoy!
06-20-07, 05:13 PM
#9
Driver
Thread Starter
Join Date: Jan 2007
Location: Missouri
Posts: 143
Likes: 0
Received 0 Likes
on
0 Posts
Thanks ChrisES & Lexusondubs, you guys are great, thats just what I was looking for. I'll be sure to post some pics when I get them in. Oh, and I just got a lip spoiler off ebay, it's the one that Frankwhite and some others bought. I hope it looks as goood as theirs do, my fingers are crossed. Thanks again.
Chris
Chris
Thread
Thread Starter
Forum
Replies
Last Post
