My GS Then to Now
#451
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
My buddy Bucky wrapped my A, B, and C pillars in carbon fiber for me
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99fff-5.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99fff-4.jpg)
Got them back
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99ggg-14.jpg)
Love the depth
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99ggg-39.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99ggg-12.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99ggg-8.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99nnn-25.jpg)
Steering Wheel Swap
Got this baby from JDM land![Smilie](https://www.clublexus.com/forums/images/smilies/smile.gif)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99ccc-8.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99ccc-10.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99ccc-9.jpg)
Complete with E-Shift button locations
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99ccc-11.jpg)
I got this Aristo airbag cover awhile back on the classifieds and it is a perfect fit. Just need to get it color matched and we’re all set.
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99ccc-13.jpg)
Unwrapped some of the foam to see what’s inside
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99ccc-12.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99ccc-3.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99ccc-2.jpg)
I can’t wait to get the airbag cover color-matched and install this new steering wheel setup in the car
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99ccc.jpg)
Here’s the OEM wheel (The “L” emblem was taken off awhile ago. I made a small carbon insert to cover that up.
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99ddd-10.jpg)
Took the two screws out from the sides (1 on each side of the airbag behind the wheel)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99ddd-25.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99ddd-27.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99fff-5.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99fff-4.jpg)
Got them back
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99ggg-14.jpg)
Love the depth
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99ggg-39.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99ggg-12.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99ggg-8.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99nnn-25.jpg)
Steering Wheel Swap
Got this baby from JDM land
![Smilie](https://www.clublexus.com/forums/images/smilies/smile.gif)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99ccc-8.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99ccc-10.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99ccc-9.jpg)
Complete with E-Shift button locations
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99ccc-11.jpg)
I got this Aristo airbag cover awhile back on the classifieds and it is a perfect fit. Just need to get it color matched and we’re all set.
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99ccc-13.jpg)
Unwrapped some of the foam to see what’s inside
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99ccc-12.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99ccc-3.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99ccc-2.jpg)
I can’t wait to get the airbag cover color-matched and install this new steering wheel setup in the car
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99ccc.jpg)
Here’s the OEM wheel (The “L” emblem was taken off awhile ago. I made a small carbon insert to cover that up.
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99ddd-10.jpg)
Took the two screws out from the sides (1 on each side of the airbag behind the wheel)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99ddd-25.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99ddd-27.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99ddd-26.jpg)
#452
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99ddd-28.jpg)
Removed the yellow airbag clip. Battery was disconnected before doing this
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99ddd.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99ddd-9.jpg)
Removed the white clip connected to the hub and gave the wheel a few jerks and it came right off
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99ddd-11.jpg)
Swapping the airbag from one housing to another
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99ddd-3.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99ddd-2.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99ddd-4.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99ddd-5.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99ddd-6.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99ddd-7.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99ddd-8.jpg)
Transplanted all the internals from one wheel to the other
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99ddd-12.jpg)
All ready to go here’s the before unwrapped
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99ddd-16.jpg)
And unwrapped!
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99ddd-17.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99ddd-18.jpg)
Rear Deck Lid
Starting to make the rear deck lid. Took the original fabric material off and started sketching the design.
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99tt-11.jpg)
Scott trimming away
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99tt-2.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99tt-4.jpg)
Time for some glue
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99tt-10.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99tt-12.jpg)
#453
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Used the same suede as the headliner material
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99tt.jpg)
Rough look at what is to come
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99tt-7.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99xx-2.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99xx-3.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99xx-4.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99xx.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99xx-6.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99xx-5.jpg)
Custom table inspired by Junction Produce
Bought this Junction Produce table from my buddy Dan
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99bbb-5.jpg)
Got the idea to make my own table but with a carbon look so….. deconstruction time
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99bbb-6.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99bbb-7.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99bbb-9.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99bbb-8.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99bbb-12.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99bbb-11.jpg)
Here is it all apart
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99bbb-13.jpg)
Got this carbon vinyl material
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99bbb-14.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99bbb-16.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99bbb-15.jpg)
Finished up the table with some carbon fiber material (Excuse the mess)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99lll-15.jpg)
Got this carbon fiber Junction Produce Emblem
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99tt.jpg)
Rough look at what is to come
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99tt-7.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99xx-2.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99xx-3.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99xx-4.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99xx.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99xx-6.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99xx-5.jpg)
Custom table inspired by Junction Produce
Bought this Junction Produce table from my buddy Dan
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99bbb-5.jpg)
Got the idea to make my own table but with a carbon look so….. deconstruction time
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99bbb-6.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99bbb-7.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99bbb-9.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99bbb-8.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99bbb-12.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99bbb-11.jpg)
Here is it all apart
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99bbb-13.jpg)
Got this carbon vinyl material
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99bbb-14.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99bbb-16.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99bbb-15.jpg)
Finished up the table with some carbon fiber material (Excuse the mess)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99lll-15.jpg)
Got this carbon fiber Junction Produce Emblem
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99lll-18.jpg)
#456
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Exterior Cameras
Decided that I wanted to have not only a rear camera but a front one as well. This is so that I can see speed bumps more clearly, parking humps, etc…
The car is a little dirty but that’s how she’s gonna stay till it is done lol.
Started by taking off the license plate
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99rr-20.jpg)
Used a uni-bit to get a hole big enough for the wiring to pass through
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99rr.jpg)
Hole is cut
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99rr-5.jpg)
After smoothing out the cut I then dampened both sides of the hole to seal it off from the elements
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99rr-11.jpg)
Dampened the rear of the camera mount for vibrations
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99rr-9.jpg)
I opted to go with the license plate style camera due to its versatility, adjustability, and ease of access, plus it was what we had available to us at the shop for an awesome price lol
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99rr-17.jpg)
Tested out the rear view, lol I know I look like a dork. The image is a little blurry too because the protective film on the cameras is still on
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99rr-16.jpg)
Wiring up the wires for the camera and also the rear monitor for the trunk. Might as well do it all at once
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99rr-2.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99rr-10.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99rr-15.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99rr-6.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99rr-14.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99rr-18.jpg)
Front camera is mounted. This sits right where I want it. Center and all I’ll have to do is cut out the grill material on the bumper in the bottom central opening to have full view
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99rr-8.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99rr-19.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99rr-4.jpg)
Testing out the front view. Again the image is a little blurry too because the protective film on the cameras is still on.
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99rr-13.jpg)
Project facelift
Got this bumper from Alexus300 as a birthday present and it was time for a facelift so we decided to pull the trigger and start the installation process and see what needed to be re-fiberglassed as well as what areas on the bumper we needed to address. Thanks again Vu! I especially love that it gives me an extra inch of ground clearance now but don’t worry everyone we’ll be getting the air ride on soon so it won’t look too high for too long
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/4gsbps.jpg)
Purchased this Veilside grill from Batmobile for my car. Took a little work to make it fit but nothing a little fiberglass won’t fix haha. Cut off the tabs and sanded down the grill for some custom fitment
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/4gsbps-11.jpg)
Almost there
Decided that I wanted to have not only a rear camera but a front one as well. This is so that I can see speed bumps more clearly, parking humps, etc…
The car is a little dirty but that’s how she’s gonna stay till it is done lol.
Started by taking off the license plate
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99rr-20.jpg)
Used a uni-bit to get a hole big enough for the wiring to pass through
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99rr.jpg)
Hole is cut
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99rr-5.jpg)
After smoothing out the cut I then dampened both sides of the hole to seal it off from the elements
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99rr-11.jpg)
Dampened the rear of the camera mount for vibrations
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99rr-9.jpg)
I opted to go with the license plate style camera due to its versatility, adjustability, and ease of access, plus it was what we had available to us at the shop for an awesome price lol
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99rr-17.jpg)
Tested out the rear view, lol I know I look like a dork. The image is a little blurry too because the protective film on the cameras is still on
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99rr-16.jpg)
Wiring up the wires for the camera and also the rear monitor for the trunk. Might as well do it all at once
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99rr-2.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99rr-10.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99rr-15.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99rr-6.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99rr-14.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99rr-18.jpg)
Front camera is mounted. This sits right where I want it. Center and all I’ll have to do is cut out the grill material on the bumper in the bottom central opening to have full view
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99rr-8.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99rr-19.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99rr-4.jpg)
Testing out the front view. Again the image is a little blurry too because the protective film on the cameras is still on.
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99rr-13.jpg)
Project facelift
Got this bumper from Alexus300 as a birthday present and it was time for a facelift so we decided to pull the trigger and start the installation process and see what needed to be re-fiberglassed as well as what areas on the bumper we needed to address. Thanks again Vu! I especially love that it gives me an extra inch of ground clearance now but don’t worry everyone we’ll be getting the air ride on soon so it won’t look too high for too long
![Smilie](https://www.clublexus.com/forums/images/smilies/smile.gif)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/4gsbps.jpg)
Purchased this Veilside grill from Batmobile for my car. Took a little work to make it fit but nothing a little fiberglass won’t fix haha. Cut off the tabs and sanded down the grill for some custom fitment
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/4gsbps-11.jpg)
Almost there
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/4gsbps-18.jpg)
#457
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Closer
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/4gsbps-17.jpg)
Pretty good for a grill that wasn’t supposed to go on this hood and for it to fit an aftermarket VIS Racing carbon fiber hood lol
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/4gsbps-16.jpg)
Bumper and grill ready for test fit #1
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/4gsbps-9.jpg)
On the car
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/4gsbps-3.jpg)
So, the bumper will clear the fog lamps lol
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/4gsbps-6.jpg)
I think I am in love lol
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/4gsbps-4.jpg)
Sanding down the paint for prep
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/4gsbps-13.jpg)
Test fitting and removing the mesh grill material
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/4gsbps-12.jpg)
Sanding down at 200 grit
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/4gsbps-15.jpg)
Almost ready for test fit #2
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/4gsbps-14.jpg)
Test fit #2!!! I think it is lookin hot!!!
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/5gsbpp.jpg)
Got these hood latches on the local classifieds and had to jump on them. I’ve always wanted to install these now it’s time to start cutting
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/8gsbp-19.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/6gsbpp-16.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/8gsbp-10.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/8gsbp-12.jpg)
Closed all the way
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/8gsbp-13.jpg)
Latch undone
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/8gsbp-14.jpg)
Latch opened
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/8gsbp-15.jpg)
Pin inserted
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/8gsbp-16.jpg)
Taped off the areas where I wanted the plates to go
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/4gsbps-17.jpg)
Pretty good for a grill that wasn’t supposed to go on this hood and for it to fit an aftermarket VIS Racing carbon fiber hood lol
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/4gsbps-16.jpg)
Bumper and grill ready for test fit #1
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/4gsbps-9.jpg)
On the car
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/4gsbps-3.jpg)
So, the bumper will clear the fog lamps lol
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/4gsbps-6.jpg)
I think I am in love lol
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/4gsbps-4.jpg)
Sanding down the paint for prep
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/4gsbps-13.jpg)
Test fitting and removing the mesh grill material
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/4gsbps-12.jpg)
Sanding down at 200 grit
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/4gsbps-15.jpg)
Almost ready for test fit #2
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/4gsbps-14.jpg)
Test fit #2!!! I think it is lookin hot!!!
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/5gsbpp.jpg)
Got these hood latches on the local classifieds and had to jump on them. I’ve always wanted to install these now it’s time to start cutting
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/8gsbp-19.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/6gsbpp-16.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/8gsbp-10.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/8gsbp-12.jpg)
Closed all the way
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/8gsbp-13.jpg)
Latch undone
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/8gsbp-14.jpg)
Latch opened
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/8gsbp-15.jpg)
Pin inserted
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/8gsbp-16.jpg)
Taped off the areas where I wanted the plates to go
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/8gsbp-18.jpg)
#459
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/9gsbp-11.jpg)
Latch closed
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99gsbp.jpg)
Latch undone
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99gsbp-3.jpg)
Latch opened
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99gsbp-5.jpg)
Closing
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99gsbp-7.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99gsbp-9.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99gsbp-2.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99gsbp-4.jpg)
Made custom brackets to hold the pins in
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99gsbp-8.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99gsbp-6.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99gsbp-10.jpg)
Decided to delete the chrome trim body line
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99hhp-29.jpg)
Sanding down the parts that were too big and oversized
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99hhp.jpg)
Much better fitment
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99hhp-3.jpg)
More sanding
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99hhp-2.jpg)
First coat of filler
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99hhp-28.jpg)
Second coat
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99hhp-4.jpg)
More sanding
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99hhp-9.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99hhp-25.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99hhp-20.jpg)
#460
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99hhp-26.jpg)
Rough look at it
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99hhp-10.jpg)
Making fiberglass rings to hold in the new custom fogs
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99hhp-14.jpg)
Cut out the rings
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99hhp-17.jpg)
Time for a test fit
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99hhp-15.jpg)
Kinda getting the idea here
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99hhp-16.jpg)
Cut out a circle for where the fogs will go through
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99hhp-18.jpg)
The new HID 3K fogs with cut off projector beams
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99hhp-13.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99hhp-8.jpg)
Rough idea
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99hhp-19.jpg)
Mock up
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99hhp-21.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99hhp-22.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99hhp-23.jpg)
Made reinforcement brackets
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99hhp-24.jpg)
Glassing the brackets in
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99hhp-11.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99hhp-12.jpg)
Glassing the foglight surrounds on
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99iip-5.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99iip.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99iip-2.jpg)
#461
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Trimming down the reinforcement brackets with a cutoff wheel
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99iip-3.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99iip-4.jpg)
Some more reinforcing fiberglass applied
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99jj.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99jj-7.jpg)
Sanding out the fog light rings to allow for even spacing for the fogs
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99jj-2.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99jj-3.jpg)
Test fit with my home made brackets lol they look jenky but they are super strong
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99jj-4.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99jj-5.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99iip-3.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99iip-4.jpg)
Some more reinforcing fiberglass applied
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99jj.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99jj-7.jpg)
Sanding out the fog light rings to allow for even spacing for the fogs
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99jj-2.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99jj-3.jpg)
Test fit with my home made brackets lol they look jenky but they are super strong
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99jj-4.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99jj-5.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99jj-6.jpg)
#463
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99xx-33.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99xx-29.jpg)
Added hardware
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99xx-31.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99xx-30.jpg)
Doing some sanding myself
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99yy-14.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99yy-12.jpg)
Gotta take the time and get it right
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99yy-15.jpg)
Making mounting points for the grill
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99yy-19.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99yy-17.jpg)
Measuring away
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99yy-18.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99yy-20.jpg)
Cut the all-thread to size
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99yy-2.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99yy.jpg)
Used some black strip caulk to semi-mount the all-thread
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99yy-3.jpg)
The strip caulk holds the thread in long enough for me to see where it needs to be and glue it in place
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99yy-4.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99yy-5.jpg)
I used some C/A glue to get it hardened in place
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99yy-21.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99yy-11.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99yy-6.jpg)
#464
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Did it 4 more times to create 5 total mounting points
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99yy-16.jpg)
Placed pieces of paper clips on the inner of the grill. These will hold the metal mesh material in place after paint
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99yy-7.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99yy-8.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99yy-10.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99yy-9.jpg)
Fiber-glassed in the mounting points over the strip caulk
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99zz-21.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99zz.jpg)
John touching up the bumper and getting it prepped for paint
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99zz-15.jpg)
Filled in the space between the fog light mounts and the bumper
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99zz-19.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99zz-2.jpg)
Wired up the 3K HID Fog Lamps
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99zz-18.jpg)
Test fitted everything on the bumper
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99zz-14.jpg)
That’s about as close as we’re going to get.
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99zz-22.jpg)
Let’s get it to the paint shop!
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99zz-20.jpg)
This is with the first coat of primer on the bumper. There are a few pinholes that need to get filled and some more primer will be needed to get rid of some waves
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99zz-17.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99zz-16.jpg)
Sanding down some high spots and repairing pinholes and other miscellaneous issues
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99fff-3.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99fff-2.jpg)
Here it is with base coat and 2 coats of black
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99yy-16.jpg)
Placed pieces of paper clips on the inner of the grill. These will hold the metal mesh material in place after paint
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99yy-7.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99yy-8.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99yy-10.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99yy-9.jpg)
Fiber-glassed in the mounting points over the strip caulk
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99zz-21.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99zz.jpg)
John touching up the bumper and getting it prepped for paint
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99zz-15.jpg)
Filled in the space between the fog light mounts and the bumper
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99zz-19.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99zz-2.jpg)
Wired up the 3K HID Fog Lamps
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99zz-18.jpg)
Test fitted everything on the bumper
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99zz-14.jpg)
That’s about as close as we’re going to get.
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99zz-22.jpg)
Let’s get it to the paint shop!
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99zz-20.jpg)
This is with the first coat of primer on the bumper. There are a few pinholes that need to get filled and some more primer will be needed to get rid of some waves
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99zz-17.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99zz-16.jpg)
Sanding down some high spots and repairing pinholes and other miscellaneous issues
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99fff-3.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99fff-2.jpg)
Here it is with base coat and 2 coats of black
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99fff.jpg)
#465
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Picked it up from the shop in John’s dually
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99iii-25.jpg)
Test fitted it on the car while it is up on stands for the air ride
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99iii-27.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99iii-29.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99iii-28.jpg)
Here’s the old grill material
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99iii-48.jpg)
The new grill material I am putting on
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99iii-47.jpg)
Traced out the old pieces onto the new material sheet
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99iii-46.jpg)
I cut out the pieces with an air saw
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99iii-50.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99iii-51.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99iii-52.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99iii-53.jpg)
Test fitting and installing the grill material
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99iii-57.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99iii-58.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99iii-55.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99iii-56.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99iii-60.jpg)
All ready to go
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99iii-62.jpg)
Got my hood and headlights back from Sinister Rods who tinted them so you can see some of the carbon weave in certain lighting. When you are far away it is black and in light or at an angle it is transparent. Also got the bumper on the car. We are just waiting for the grill to come back from paint.
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99kkk.jpg)
Took the car outside after giving the front end a quick wipe
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99iii-25.jpg)
Test fitted it on the car while it is up on stands for the air ride
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99iii-27.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99iii-29.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99iii-28.jpg)
Here’s the old grill material
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99iii-48.jpg)
The new grill material I am putting on
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99iii-47.jpg)
Traced out the old pieces onto the new material sheet
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99iii-46.jpg)
I cut out the pieces with an air saw
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99iii-50.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99iii-51.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99iii-52.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99iii-53.jpg)
Test fitting and installing the grill material
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99iii-57.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99iii-58.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99iii-55.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99iii-56.jpg)
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99iii-60.jpg)
All ready to go
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99iii-62.jpg)
Got my hood and headlights back from Sinister Rods who tinted them so you can see some of the carbon weave in certain lighting. When you are far away it is black and in light or at an angle it is transparent. Also got the bumper on the car. We are just waiting for the grill to come back from paint.
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99kkk.jpg)
Took the car outside after giving the front end a quick wipe
![](http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/99kkk-8.jpg)