For people with G35 wheels, do you use hub centric rings?
07-30-10, 06:38 PM
#77
I use the same tuner lugs. My rear tire is 245/35/19 and with -2 of camber I can run a 10mm spacer, but that leaves me with absolutely no room in between. I don't have rolled or shaved quarters either. I'm going to put on my friends old spacers on soon and see how it is. 5mm up front and 10mm in the rear.
08-02-10, 09:42 AM
#78
I use the same tuner lugs. My rear tire is 245/35/19 and with -2 of camber I can run a 10mm spacer, but that leaves me with absolutely no room in between. I don't have rolled or shaved quarters either. I'm going to put on my friends old spacers on soon and see how it is. 5mm up front and 10mm in the rear.
08-18-10, 08:27 AM
#81
Driver School Candidate
Join Date: May 2010
Location: AZ
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
well update since mike has reminded me of this thread. The G35 hub bore is 66.06 and the gs is 60.06 but both the measurement are rounded up to the nearest tenth so that equates to 66.1 for the g35 and 60.1 for the gs. I received the hub rings from 1010tires and they fit perfectly. After installation I experienced about a 90% reduction in shake I still get a little bit but its probably my car need to change all of the bushing on the front end.
09-02-10, 01:45 PM
#82
future plans while im doing this are to put on the coils im getting from a local member,finally install my Daizen control arm bushings,either FIG's RCA's or SAGE's RCA,and either the ls400 brake kit or the TT brake kit
anyone have a suggestion on a good tire? not to noisy, good all around handling and not to quick to wear out. i been using michelin energy MXV4'S which are GREAT tires but they dont make them in the 19's plus they are expensive in 16's yet alone the retarded cost if 19's
09-15-10, 09:21 PM
#83
well i did pick up the rims today (actually my brother picked up the rims in oregon for me) the seller let me know 3 are 19x8 and one is 19x8.5 so he sold them to me for $150 wow what a amazing price. so now i will sell the 19x8.5 and pick up 2 more 19x8,one to replace it and one for a full sized spare
im gonna run 235/35/19 Michelin Pilot Sport AS Plus Tires (wanted to run the pilot sport plus but they will wear out WAY to quickly for the cost of them)
so with this setup, should i go for 10mm spacers F&R? if so, im assuming they wont rub at all with no fender mods
im gonna run 235/35/19 Michelin Pilot Sport AS Plus Tires (wanted to run the pilot sport plus but they will wear out WAY to quickly for the cost of them)
so with this setup, should i go for 10mm spacers F&R? if so, im assuming they wont rub at all with no fender mods
Last edited by sakataj; 09-15-10 at 09:27 PM.
09-15-10, 09:30 PM
#84
well i did pick up the rims today (actually my brother picked up the rims in oregon for me) the seller let me know 3 are 19x8 and one is 19x8.5 so he sold them to me for $150 wow what a amazing price. so now i will sell the 19x8.5 and pick up 2 more 19x8,one to replace it and one for a full sized spare
im gonna run 235/35/19 Michelin Pilot Sport AS Plus Tires (wanted to run the pilot sport plus but they will wear out WAY to quickly for the cost of them)
so with this setup, should i go for 10mm spacers F&R? if so, im assuming they wont rub at all with no fender mods
im gonna run 235/35/19 Michelin Pilot Sport AS Plus Tires (wanted to run the pilot sport plus but they will wear out WAY to quickly for the cost of them)
so with this setup, should i go for 10mm spacers F&R? if so, im assuming they wont rub at all with no fender mods
09-17-10, 02:54 PM
#85
Driver
iTrader: (1)
Join Date: Apr 2009
Location: CA
Posts: 100
Likes: 0
Received 0 Likes
on
0 Posts
If i slap the g35 7-spokes onto my 1gs what size or kind of lug nuts do I need? 12x1.5MM? I already got the hub rings. But, I'm curious about the lug nuts since people are saying we can't/shouldn't use the stock ones.
09-18-10, 08:49 AM
#88
they not in bad shape but im gonna clean them up, little paint chipping and some minor curbage but for 150 i dont care. rims need a little buffing and what not but should be good to go soon (5th pic is a paint chip not a curb and last 2 pics are the rim im gonna sell 19x8.5 and no thats not a curb mark its grease)
09-18-10, 09:37 AM
#90
Brian are you asking about 10mm spacers front and rear? If so then that is hard to figure out without knowing your height or fender mods. G35 wheels are 33 or 30 offset depending if you are using the 8.5's or the 8s. Would need more info in order to give you better advise.