excluesive

iTrader: (10)

do you think there is enough space to retro fit a projector, even a small H3 halogen projector in the 2GS fog lamps?

any one done it before? any feedback?


** mods please leave in the 2GS forum for a few hours if possible

JeffTsai

iTrader: (1)

I tried this but was unsucessful. Main reason is because the foglight front lens is wavy. No way to get rid of those. I tried sanding but no luck, it's some incredibly hard material...possibly glass but I can't confirm that. I ended up wasting a set of fogs because of the failed sanding. If you can somehow fabricate a thick curved piece of Lexan to fit on there then you should be good to go. A small projector such as a 1inch unit will fit in there. I was actually gonna use the 350z HID projector. I abandoned the project after I was unable to get the waves out of the lenses.

If you want to attempt it, then I have a set of fogs for sale here. One has a sanded up lens. The other one is still in good condition.

DJ TANTRA

This should be interesting Chris,

But can we work on my tails first!!!!!!!!!!!!!!!

excluesive

iTrader: (10)

i told u whenever your ready dammit!

BklynGS

iTrader: (2)

I'm still trying to figure this one out. there is plenty of room behind the passenger side fog light for a projector to fit, but the windshield wiper fluid tank is behind the driver side foglight leaving not enough space behind the foglight for the projector to stick out of the back. I'm trying to find the 3rd gen GS projectors because the bulbs in those go in from the side.

excluesive

iTrader: (10)

ahh.. i see... i gotta start taking things apart to see what I have to work with then

jamodeo

iTrader: (1)

would really really like this....

ILOVEGIRLS

iTrader: (3)

ay-nako's fog has a 350z projector in it. he is not finished but you may wanna ask him how far along he is on the project.

i have 350z headlights if anyone wants to buy them. ill include the HID ballast and bulb.

FinLIFE

iTrader: (8)

I think jp makes clear fogs..if your baller enough to buy those and then retrofit some hid projectors in there then go for it. I think a member has already done this.

chrispy

iTrader: (21)

It can definately fit a small H3 projector but the glass lens is a problem. If you can vacuum form your own lens then you're in business.

3UZFTE

And when you do, someone it jsut going to steal them in less than 5 minutes... there goes 2 hundred bucks..

kit cat

iTrader: (6)

i take it you didn't read the thread about the sears alignment?

what about swapping 100 series Land Cruiser's for projectors? ..then again, aren't fogs supposed to have a wider projection of light?

3UZFTE

I did, if you referring to the cost of the fogs.. i factored in the cost of a set of fogs and the projectors themselves. But i guess... i mean who wants to give a peice of **** $100, plus my time and effort to replace that *****.

Ay-nako

iTrader: (25)

yeah by no means is it easy i wanted to have a clean look but then a friend actually gave me a set of 350 z projectors!

its hard guys!

Ay-nako

iTrader: (25)

junction produce fogs are bolted from the inside of the bumper you have to take the bumper off in order to take the fogs off