When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I've always heard shaving was preferred on our cars because of the thick fender linings? I hope my Tein CS has enough camber to work with.
The sizes are
19x9 +23 235/35/19
19x10 +23 245/35/19
That is close to what I'm running in terms of offset. My front tire size is 225/35/19. I have the tire right at the fender well with my tein flex which is why they do camber nicely. Also, I've shaved the fender wells for extra clearance.
ps The front you can get away with rolling but the rear would be easier to shave because its much thicker sheet metal.
That is close to what I'm running in terms of offset. My front tire size is 225/35/19. I have the tire right at the fender well with my tein flex which is why they do camber nicely. Also, I've shaved the fender wells for extra clearance.
ps The front you can get away with rolling but the rear would be easier to shave because its much thicker sheet metal.
Was it hard to roll the fenders in the front? I'm worried about the paint cracking. How did you shave the rears? Did you do it yourself?
Was it hard to roll the fenders in the front? I'm worried about the paint cracking. How did you shave the rears? Did you do it yourself?
Well, I was disappointed to find out it could be done afterwards. But moreless, I'm happy shaving all four fenders instead of any rolling. If you shave your fronts then you won't be able to retain your fender liners.
11-18-07, 09:26 AM
