carbongs

iTrader: (13)

Yeah, he is working on your stuff on the bike, as far as the car - still under the car cover! lol I showed him this thread so you may be hearing back from him in classic Bucky style.

Pm me Mike, we'll get something set up for you bro.

thank you! i wanted to be different. It is something I've never seen done in a GS before so i went for it!

lol Pm the ones you don't want and we'll see what we can work out! lol

thank you! yeah it isn't that easy but luckily we are learning more and more each time. we are saving up for a vacuum sealer to do other items with more curves and such. should be fun to experiment!

I also had a member pm me about how i did the initial install. well, for me it was because i also go on long road trips to shows in this car and i want to be able to use other electonic devices on the road i.e. laptop, charge phone, etc... so i got a power inverter and installed it directly to my battery through the firewall directly behind the battery location. i took off the glove box console, and fed the wires through to the inverter. while i had my dash apart for the carbon fiber trim etc... i fed the audio and video rca's to the pioneer avic d-3 which already has pre outs and ins for things like gaming systems, rear head rest monitors, and back up cameras.

i mounted the inverter here out of the way



i still have some work to do. i over estimated the size of the hole i dremeled out but i will be wrapping the whole glovebox on the inside with carpet to make it a cleaner install.

you can see the big hole behind the ps2 here

UncleRay

iTrader: (2)

Carbon, if I were you, I'd mount that PS2 down before it starts bouncing around and messing up your disks.

carbongs

iTrader: (13)

it is mounted down on a wooden panel with 3m double sided tape which is screwed onto the glovebox floor. i thought of it before hand

carbongs

iTrader: (13)

Bucky finished up the carbon today! Woot Woot!

speedaddic

iTrader: (10)

gotta do something about that hole in the glove box though man....especially for a "show car"

carlos

iTrader: (1)

looks sick!

kevs98GS4

iTrader: (1)

looks sweet! when do I get a chance to see it????? oh, and tell ron he is a punk a$$! hehehe

cpone

What no carbon wrap on the air intake, strut bar and Engine cover?

Slack'n man. You Slack'n...

*shakes head*


-------

lol.. J/K

Looks good man.
What is the eventual outcome you are looking for though?
Or is it a slow evolution with no set destination.
So far I like it.

LEXUS_KID

iTrader: (4)

carbongs

iTrader: (13)

i did say i was doing something about it -

thanks!

when every you come by the shop! just fyi i will be out of town friday-sunday! but anytime after that!

lol, i've thought about it! trust me. but to wrap those pieces we need a vacuum sealer because of all the grroves and curves. i may just break down and buy a used set. i know itp used to make them. there is no set destination, just slowly doing things that come to mind! thanks though for your kind words

carbongs

iTrader: (13)

lol you guys crack me up. of course i'll be filling in the hole. i can't leave it like that! lol

speedaddic

iTrader: (10)

cleaner solution may be a carbon sheet that covers the opening of the glove box, so the ps2 and ipod are the only openings.

carbongs

iTrader: (13)

that's a fantastic idea! will have to put that up on my brainstoriming wall. thanks!

importart

carbon looks good, would like to see pics when you are completely done

carbongs

iTrader: (13)

lol completely done, that'll never happen! neva!