New GS430 Owner
#16
Lexus Test Driver
iTrader: (8)
Nice pick up on the ride. It looks very clean. Not to jack this thread but I have some pro series BA speakers for sale NIB.
https://www.clublexus.com/forums/sho...d.php?t=340890
https://www.clublexus.com/forums/sho...d.php?t=340890
#17
Lead Lap
Thread Starter
iTrader: (4)
Join Date: Mar 2008
Location: CT
Posts: 647
Likes: 0
Received 0 Likes
on
0 Posts
To the other poster who offered stuff for sale. I'm all set. I've got speakers installed and keeping my factory nav/cd changer. Thanks though.
Thanks again for all the nice comments.
#19
Lexus Champion
iTrader: (4)
I had some MB Quart PWE302s 12" in my other 4 cars (Including 4 of them in that station wagon), but due to the poor sounding reasonation in the Audi I kept messing with the setting and eventually ended up blowing them lol. I want to get the timing belt service done and a quick run down before I throw the subs in. But the speaker situation was something I had to take care of immediately as I only had tweeters working in the car.
To the other poster who offered stuff for sale. I'm all set. I've got speakers installed and keeping my factory nav/cd changer. Thanks though.
Thanks again for all the nice comments.
To the other poster who offered stuff for sale. I'm all set. I've got speakers installed and keeping my factory nav/cd changer. Thanks though.
Thanks again for all the nice comments.
#20
Pole Position
Join Date: Oct 2004
Location: Washington
Posts: 376
Likes: 0
Received 0 Likes
on
0 Posts
Great car, and you certainly didn't over pay for it. (Not unlke someone who has a Cinnabar/Black 430, but that guy will go un-named!).
That's a lot of car for a 20 year old, when I was that age, (a LONG time ago) I was immortal. Enjoy the car.
That's a lot of car for a 20 year old, when I was that age, (a LONG time ago) I was immortal. Enjoy the car.
#22
Lead Lap
Thread Starter
iTrader: (4)
Join Date: Mar 2008
Location: CT
Posts: 647
Likes: 0
Received 0 Likes
on
0 Posts
I used this to power my MB Quarts
http://www.crutchfield.com/S-ugMs2ZV...+quart+raa2400
I still have the amp. I thought it was blown a few years ago. I go to hook it up again (like 4-5 months ago) and the amp was fine. The wiring in my first car was bad I guess.
In my 2nd-4th cars I used a Kenwood 9102d. Only gave them 500rms and didn't sound as good the MB quart amp. Remember these subs can handle 600rms a piece. If you sub is a dual 2 ohm you have pwe302s, if its a dual 4 ohm you have pwe304s. I also have the 4 channel of the same model. When my first car was crashed, I left the wiring and didn't think anything of it. But these mb quart amps actually make you plug it into a piece and then go into the terminal. Without the piece, there's no way to hook up the amp. So I either have to use one of the other. It sucks because the 4 channel is capable of doing 200x4 at 2 ohms, which would be good for a low end sub, 4 sub set up. Good luck with your system. After I do the tbelt service, mine will be in. I want to add alot more however. The next town over has one of the top 50 custom shops in the country by ME mag...so .
http://www.crutchfield.com/S-ugMs2ZV...+quart+raa2400
I still have the amp. I thought it was blown a few years ago. I go to hook it up again (like 4-5 months ago) and the amp was fine. The wiring in my first car was bad I guess.
In my 2nd-4th cars I used a Kenwood 9102d. Only gave them 500rms and didn't sound as good the MB quart amp. Remember these subs can handle 600rms a piece. If you sub is a dual 2 ohm you have pwe302s, if its a dual 4 ohm you have pwe304s. I also have the 4 channel of the same model. When my first car was crashed, I left the wiring and didn't think anything of it. But these mb quart amps actually make you plug it into a piece and then go into the terminal. Without the piece, there's no way to hook up the amp. So I either have to use one of the other. It sucks because the 4 channel is capable of doing 200x4 at 2 ohms, which would be good for a low end sub, 4 sub set up. Good luck with your system. After I do the tbelt service, mine will be in. I want to add alot more however. The next town over has one of the top 50 custom shops in the country by ME mag...so .
#23
Lead Lap
Thread Starter
iTrader: (4)
Join Date: Mar 2008
Location: CT
Posts: 647
Likes: 0
Received 0 Likes
on
0 Posts
Despite however much you paid, Cinnabar GS' are hot. There is one in my area. Unfortunately, it only looks good in the front...the rear has seen much better days. I know it's alot of car for 20 year old, but it's okay when the 20 year has the mind set of the middle aged guy who drivers conservative and occasionally steps on it on open highways to only 95/100mph lol.
#26
welcome to clublex and congrats on the purchase. the car looks great and well maintained. i'm 24 so i know how you feel. do your regular maintenance and it should last you a long time. and cut back on the speeding haha
Last edited by Chumacher; 03-13-08 at 01:29 PM.
#27
Lexus Champion
iTrader: (4)
I used this to power my MB Quarts
http://www.crutchfield.com/S-ugMs2ZV...+quart+raa2400
I still have the amp. I thought it was blown a few years ago. I go to hook it up again (like 4-5 months ago) and the amp was fine. The wiring in my first car was bad I guess.
In my 2nd-4th cars I used a Kenwood 9102d. Only gave them 500rms and didn't sound as good the MB quart amp. Remember these subs can handle 600rms a piece. If you sub is a dual 2 ohm you have pwe302s, if its a dual 4 ohm you have pwe304s. I also have the 4 channel of the same model. When my first car was crashed, I left the wiring and didn't think anything of it. But these mb quart amps actually make you plug it into a piece and then go into the terminal. Without the piece, there's no way to hook up the amp. So I either have to use one of the other. It sucks because the 4 channel is capable of doing 200x4 at 2 ohms, which would be good for a low end sub, 4 sub set up. Good luck with your system. After I do the tbelt service, mine will be in. I want to add alot more however. The next town over has one of the top 50 custom shops in the country by ME mag...so .
http://www.crutchfield.com/S-ugMs2ZV...+quart+raa2400
I still have the amp. I thought it was blown a few years ago. I go to hook it up again (like 4-5 months ago) and the amp was fine. The wiring in my first car was bad I guess.
In my 2nd-4th cars I used a Kenwood 9102d. Only gave them 500rms and didn't sound as good the MB quart amp. Remember these subs can handle 600rms a piece. If you sub is a dual 2 ohm you have pwe302s, if its a dual 4 ohm you have pwe304s. I also have the 4 channel of the same model. When my first car was crashed, I left the wiring and didn't think anything of it. But these mb quart amps actually make you plug it into a piece and then go into the terminal. Without the piece, there's no way to hook up the amp. So I either have to use one of the other. It sucks because the 4 channel is capable of doing 200x4 at 2 ohms, which would be good for a low end sub, 4 sub set up. Good luck with your system. After I do the tbelt service, mine will be in. I want to add alot more however. The next town over has one of the top 50 custom shops in the country by ME mag...so .
Thread
Thread Starter
Forum
Replies
Last Post