Squeaking steering column? Here's my $3 solution
#17
Lexus Fanatic
iTrader: (182)
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
coco, im headed to autozone to pick up some white lithium grease but im not having the same squeaking as you'll were. mine happens when i turn the steering wheel hard/left to right.will update if this fixes mine
UPDATE....no need to go to autozone. we have the ags brand white lithuim grease in stock. soon as i get off here im gonna go do this
UPDATE....no need to go to autozone. we have the ags brand white lithuim grease in stock. soon as i get off here im gonna go do this
Last edited by sakataj; 12-04-09 at 08:28 AM.
#18
Lexus Champion
iTrader: (18)
Join Date: Nov 2005
Location: Southern Ca
Posts: 1,759
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
I need this for sure........ also guys, can this grease also be used on the seat rails? Can I use the white lithium grease too on the seat or no?
My seat squeaks bad like a fat kid farting eating cake at the same time. =/
Dara
My seat squeaks bad like a fat kid farting eating cake at the same time. =/
Dara
#23
Advanced
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Thanks for the write up. My steering wheel was stuck in the upward position. I used WD 40 for now and it worked great. All I hear is normal motor sound no sqeaking or grinding.
#24
Lexus Fanatic
iTrader: (182)
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
OP.....now i didnt think this would fix mine. im going to the shop tonight and breaking out the trust T30 torque and taking off the steering wheel. i think my clock spring is making my squeak. will find out and update l8r, im hoping lol
#27
Driver School Candidate
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
I'm just writing this up b/c when your date complains about how bad your steering squeaks every time you put in/take out your key, it's bad. I couldn't find a DIY so I did it myself and thought i'd contribute since our cars are getting 10 years old.
Please fix your car at your own risk!
1. go get some general purpose grease from Autozone or wherever. I got a big can for $3 and it says it's used by many Japanese cars...so I figured,![Woot](https://www.clublexus.com/forums/images/smilies/woot.gif)
2. take off the 3 bolts thats holding the steering column cover. If you don't know where it's located or how to, just looking around the steering column. two are behind the steering wheel and you will have to turn it to get to it. Lightly take apart the bottom and top cover.
3. start greasing!!
and I recommend some plastic gloves also (like those 100pack for 5bucks one).
![](http://i165.photobucket.com/albums/u73/Coco-bun/Lexus/IMG_1748.jpg)
the red circle is one of the culprits
![](http://i165.photobucket.com/albums/u73/Coco-bun/Lexus/IMG_1749.jpg)
close up. grease around it.
Now, get underneath your steering column...and you should see this.
![](http://i165.photobucket.com/albums/u73/Coco-bun/Lexus/IMG_1747.jpg)
see that small metal part in the middle of the pic?
here's the close up of that middle metal part. grease where it's circled red.
![](http://i165.photobucket.com/albums/u73/Coco-bun/Lexus/IMG_1743.jpg)
![](http://i165.photobucket.com/albums/u73/Coco-bun/Lexus/IMG_1745.jpg)
![](http://i165.photobucket.com/albums/u73/Coco-bun/Lexus/IMG_1746.jpg)
real close up
Now, you're gonna have to "pack" the grease and tilt up/down as you grease to get the grease around that shaft. Do so until the sound goes away.
![](http://i165.photobucket.com/albums/u73/Coco-bun/Lexus/th_MVI_1751.jpg)
the finished product, tada![Woohoo](https://www.clublexus.com/forums/images/smilies/woohoo.gif)
Please fix your car at your own risk!
1. go get some general purpose grease from Autozone or wherever. I got a big can for $3 and it says it's used by many Japanese cars...so I figured,
![Woot](https://www.clublexus.com/forums/images/smilies/woot.gif)
2. take off the 3 bolts thats holding the steering column cover. If you don't know where it's located or how to, just looking around the steering column. two are behind the steering wheel and you will have to turn it to get to it. Lightly take apart the bottom and top cover.
3. start greasing!!
and I recommend some plastic gloves also (like those 100pack for 5bucks one).
![](http://i165.photobucket.com/albums/u73/Coco-bun/Lexus/IMG_1748.jpg)
the red circle is one of the culprits
![](http://i165.photobucket.com/albums/u73/Coco-bun/Lexus/IMG_1749.jpg)
close up. grease around it.
Now, get underneath your steering column...and you should see this.
![](http://i165.photobucket.com/albums/u73/Coco-bun/Lexus/IMG_1747.jpg)
see that small metal part in the middle of the pic?
here's the close up of that middle metal part. grease where it's circled red.
![](http://i165.photobucket.com/albums/u73/Coco-bun/Lexus/IMG_1743.jpg)
![](http://i165.photobucket.com/albums/u73/Coco-bun/Lexus/IMG_1745.jpg)
![](http://i165.photobucket.com/albums/u73/Coco-bun/Lexus/IMG_1746.jpg)
real close up
Now, you're gonna have to "pack" the grease and tilt up/down as you grease to get the grease around that shaft. Do so until the sound goes away.
![](http://i165.photobucket.com/albums/u73/Coco-bun/Lexus/th_MVI_1751.jpg)
the finished product, tada
![Woohoo](https://www.clublexus.com/forums/images/smilies/woohoo.gif)
Berge
#30
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Only one thing to ad.
Make sure the top cover is removed first and put back on last.
Top and bottom snap together.
Steering wheel squeak done.
10 minutes getting the bottom cover off.
(It would not clear the square tilt button.
Stumbled on the solution which was to remove the top cover first, to give more room to maneuver off the bottom cover.)
Greasing took 5 minutes, mostly spent raising and lowering the steering wheel to make sure the grease covered the worm gear and both ends of the shaft.
15 minutes attempting to get the top cover and bottom cover to align.
(Finally figured out that although it was easy to place bottom shaft cover around square tilt button without having top cover on, with the bottom cove in place the top cover metal brackets with the holes to allow the screws to go through and into the plastic screw receiving shafts were hitting those shafts. So top cover needed to be fitted down first. After that it was easy to raise the bottom cover into place to meet the top cover.
Article was great for photos and solution.
Just follow sequence as above.
Now squeak is gone and I need not set any mouse traps.
Bob
Make sure the top cover is removed first and put back on last.
Top and bottom snap together.
Steering wheel squeak done.
10 minutes getting the bottom cover off.
(It would not clear the square tilt button.
Stumbled on the solution which was to remove the top cover first, to give more room to maneuver off the bottom cover.)
Greasing took 5 minutes, mostly spent raising and lowering the steering wheel to make sure the grease covered the worm gear and both ends of the shaft.
15 minutes attempting to get the top cover and bottom cover to align.
(Finally figured out that although it was easy to place bottom shaft cover around square tilt button without having top cover on, with the bottom cove in place the top cover metal brackets with the holes to allow the screws to go through and into the plastic screw receiving shafts were hitting those shafts. So top cover needed to be fitted down first. After that it was easy to raise the bottom cover into place to meet the top cover.
Article was great for photos and solution.
Just follow sequence as above.
Now squeak is gone and I need not set any mouse traps.
Bob