GS - 2nd Gen (1998-2005) Discussion about the second generation GS300, GS400 and GS430 (1998 - 2005)

will these wheels fit my car???

Thread Tools
 
Search this Thread
 
Old 06-14-08, 05:43 PM
  #1  
handoverfi
Pole Position
Thread Starter
iTrader: (7)
 
handoverfi's Avatar
 
Join Date: Feb 2007
Location: Tx
Posts: 2,265
Likes: 0
Received 0 Likes on 0 Posts
Default will these wheels fit my car???

i found these on ebay and i might bid on them if they fit
this is what it says in the auction below
http://cgi.ebay.com/ebaymotors/BBS-M...spagenameZWDVW
AUCTION INCLUDES 4 GENUINE BBS MODUALR 3-PIECE WHEELS WITH MAGNESIUM CENTERS,WHEELS ARE 100% GENUINE BBS WHEELS,WHEELS ARE IN GOOD USED CONDITION WITH NO CURB RASH,WHEELS DO HAVE SOME SCRATCHES ON THE SPOKES,WHEELS ARE TRUE AND STRAIGHT,EACH WHEEL HAS SEVERAL PARTS NUMBERS SINCE THESE ARE 3-PIECE WHEELS,FRONT WHEEL PART NUMBERS ARE 01.82.041.0702 AND 01.83.055.0602,THESE ARE THE NUMBERS ON THE WHEELS,HERE ARE THE FRONT WHEEL NUMBERS THAT ARE NEAR THE CENTER CAP,102770 AND 0228322,FRONT WHEELS ARE 18X9, 5 LUG, 4 1/2" OR 114.3MM BOLT PATTERN,REAR WHEEL PART NUMBERS ARE 01.96.016.0600 AND 01.97.025.0902,THESE ARE THE NUMBERS ON THE WHEELS,HERE ARE THE NUMBERS THAT ARE ON THE REAR WHEELS NEAR THE SPOKES 102783 AND 0223323,REAR WHEELS ARE 19X11.5, 5 LUG, 4 1/2" OR 114.3MM BOLT PATTERN,WHEELS COME COMPLETE WITH BBS CENTER CAPS,WHEELS WILL FIT A WIDE VARIETY OF VEHICLES,EMAIL ME WITH ANY QUESTIONS

Last edited by handoverfi; 06-14-08 at 05:53 PM.
Old 06-14-08, 06:05 PM
  #2  
macd7919
Lexus Champion
iTrader: (10)
 
macd7919's Avatar
 
Join Date: Jun 2004
Location: MD/WA
Posts: 2,539
Likes: 0
Received 5 Likes on 5 Posts
Default

Just by a quick glance those rears seem a bit wide. 11.5" is most likely going to need some fender mods in the back IF the offsets are even close to watch you need since they aren't listed in the auction. You also realize these are 18" in the front and 19" in the back right?
Old 06-14-08, 06:09 PM
  #3  
handoverfi
Pole Position
Thread Starter
iTrader: (7)
 
handoverfi's Avatar
 
Join Date: Feb 2007
Location: Tx
Posts: 2,265
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by macd7919
Just by a quick glance those rears seem a bit wide. 11.5" is most likely going to need some fender mods in the back IF the offsets are even close to watch you need since they aren't listed in the auction. You also realize these are 18" in the front and 19" in the back right?


lol you know what your right i just realized that when i looked at the auction. i know they are 18 in the front and 19 in the back. I just failed to see the 11.5 thing! o well i guess ill keep looking unless i plan on doing some rolled fenders or something LoL

thanks man !
Old 06-14-08, 06:55 PM
  #4  
GS FONZy
Lexus Champion
iTrader: (6)
 
GS FONZy's Avatar
 
Join Date: Oct 2006
Location: ca
Posts: 3,729
Received 4 Likes on 4 Posts
Default

Originally Posted by macd7919
Just by a quick glance those rears seem a bit wide. 11.5" is most likely going to need some fender mods in the back IF the offsets are even close to watch you need since they aren't listed in the auction. You also realize these are 18" in the front and 19" in the back right?
They are not 11.5 or even close

18x8 & 19X9.5 I think the offset is in the 50+
So yeah they fit, but I would not do that high of an offset on the GS
Old 06-14-08, 06:56 PM
  #5  
jriggs
Lead Lap
 
jriggs's Avatar
 
Join Date: May 2007
Location: where it's f*#%ing cold
Posts: 628
Likes: 0
Received 0 Likes on 0 Posts
Default

the 18s front 19s rear might look good on the gs, but the 11.5 wide is probably too tight with out fender modification without the offset its real hard to tell though

edit - just looked at pics 18-8 / 19.9.5
Old 06-14-08, 07:05 PM
  #6  
handoverfi
Pole Position
Thread Starter
iTrader: (7)
 
handoverfi's Avatar
 
Join Date: Feb 2007
Location: Tx
Posts: 2,265
Likes: 0
Received 0 Likes on 0 Posts
Default

salll good i think i know what kind of wheels im gona get now!! exe kon kaves i hope they make them in a 20" staggered setup!
Old 06-14-08, 07:15 PM
  #7  
handoverfi
Pole Position
Thread Starter
iTrader: (7)
 
handoverfi's Avatar
 
Join Date: Feb 2007
Location: Tx
Posts: 2,265
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by handoverfi
salll good i think i know what kind of wheels im gona get now!! exe kon kaves i hope they make them in a 20" staggered setup!
should i get me some staggered 20s and some springs to drop one 1.5". i dont care if the wheels dont tuck and plus i dont want to go super low.
Old 06-14-08, 11:36 PM
  #8  
4ntvings
Lexus Fanatic
iTrader: (6)
 
4ntvings's Avatar
 
Join Date: Aug 2006
Location: CA
Posts: 5,547
Received 7 Likes on 5 Posts
Default

Originally Posted by handoverfi
salll good i think i know what kind of wheels im gona get now!! exe kon kaves i hope they make them in a 20" staggered setup!
my friend had konkaves on his black 2GS; wasnt bad imho.
just not my cup of tea tho-axxis wheels
GL! yes, i believe u can get the konkaves staggered.
Old 06-15-08, 12:15 AM
  #9  
GS FONZy
Lexus Champion
iTrader: (6)
 
GS FONZy's Avatar
 
Join Date: Oct 2006
Location: ca
Posts: 3,729
Received 4 Likes on 4 Posts
Default

Originally Posted by handoverfi
salll good i think i know what kind of wheels im gona get now!! exe kon kaves i hope they make them in a 20" staggered setup!
Yeah, something like these with some DFs and your good to go

Last edited by GS FONZy; 06-15-08 at 12:41 AM.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
batchelor
NX - 1st Gen (2015-2021)
11
11-01-16 12:54 PM
threeputt2
Wheels, Tires & Brakes Forum
7
04-27-11 06:55 AM
stephencd1
SC430 - 2nd Gen (2001-2010)
7
08-23-09 01:49 PM
importart
GS - 2nd Gen (1998-2005)
1
02-29-08 10:42 AM
nardeezy
Wheels, Tires & Brakes Forum
19
05-26-06 12:24 AM



Quick Reply: will these wheels fit my car???



All times are GMT -7. The time now is 12:13 AM.