Just ordered wheels(Work Meisters) need some help!
#1
Just ordered wheels(Work Meisters) need some help!
Hey guys so I just ordered wheels. Pretty much I have an idea how they will look but I want some other members input on these. I dont know much about wheel fitment and offset, etc. I got the Work Meister S1's 3pc. Heres the specs:
Front
19x8.5 +31 Offset
Rear
19x10 +29 Offset
Keep in mind I have some coilovers on the way and plan on slaming the car. Also I want it to be flush with the fenders and pretty aggressive. Fender rolling is not an issue for me I will be getting that done. I also wanted to make sure a BBK will clear. For the guys out there with a lot of wheel fitment experience, any info would be greatly appreciated. Thanks guys!
Front
19x8.5 +31 Offset
Rear
19x10 +29 Offset
Keep in mind I have some coilovers on the way and plan on slaming the car. Also I want it to be flush with the fenders and pretty aggressive. Fender rolling is not an issue for me I will be getting that done. I also wanted to make sure a BBK will clear. For the guys out there with a lot of wheel fitment experience, any info would be greatly appreciated. Thanks guys!
#3
Lexus Fanatic
#6
Lexus Test Driver
Join Date: May 2008
Location: australia
Posts: 878
Likes: 0
Received 0 Likes
on
0 Posts
whitevomr - if you search there is a thread 'Pic Request: Aggressive wheel fitments on 2GS' or something like that. it has several pictures, including those of Chrispy's car (19x9 19x10 +23) along with shoeshine's car (19x9 19x10 +21) and several others. But those two i mentioned are good fitment at a reasonable coilover driveable height (though Chrispy was on CS and proably would have gone lower if he could!)
so i would say a 10mm spacer in the rear to get flush, and about a 15mm or so in front
so i would say a 10mm spacer in the rear to get flush, and about a 15mm or so in front
Thread
Thread Starter
Forum
Replies
Last Post